Rival VS230 Seal A Meal Vacuum Food Sealer Logo

Related Topics:

Posted on Nov 06, 2012

Rival Seal a Meal VS100 cannot close the lid - Rival VS230 Seal A Meal Vacuum Food Sealer

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 28, 2010

SOURCE: Had a Rival VS110 Seal-a-meal vacume good sealer

you have to push down with a lot of force to get the rubber seal to give enough to allow it to latch...

Ad

Anonymous

  • 2926 Answers
  • Posted on Dec 22, 2010

SOURCE: Hi I have a RIVAL

Bag will not seal

• Check that there aren't any gaps, folds, wrinkles or holes in pre-sealed edges.

• Moisture of foods with high liquid content will prevent the bag from

sealing properly. Cut bag open and wipe top inside of bag and reseal.

• Make sure you've placed the bag in the proper place. When making a

bag from a roll, make sure end of cut piece is on Sealing Strip, NOT over

Lower Sealing Gasket or in Drip Tray.

• Make sure you give the appliance time to cool down. Wait at least 20
seconds between seals.

If all the above have been verified and the machine will still not pull a vacuum, you will need to replace the upper and lower gaskets.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Gadgets vs107 top and bottom rival seal a meal

ind helpful customer reviews and review ratings for Seal-A-Meal VS107 ... Also, you don't have to search for Rival bags..any 5-mil vacuum seal bag will ... Two things, you have to get the top of the bag straight and flat for it to make the seal. ... I checked out lots of different brands before deciding to buy this lower cost model.
2helpful
1answer

Nedd the new tape for a seal a meal machine, rival

dated: Wednesday, November 20th, 2013
Call:
Rival Customer Service at 1-800-557-4825
2helpful
1answer

Need upper and lower sealing gaskets for Rival Seal-A-Meal VS107

I've been told you can order replacement gaskets from Rival, about $6/set 1-800-557-4825 and $8 shipping, so may want to stock up (prices were quoted from 2012)
3helpful
1answer

How do you make a bag from a roll for a vs240

place the end of the roll just past the wire heating element into the sealer and press and hold the lid closed until the cycle finishes. (I usually do this twice in a slightly different place). Remove the roll and cut the plastic back far enough into the roll for the bag you are going to fill. Leave enough space to seal the bag after you have filled it. Seal the filled bag according to the instructions.
2helpful
1answer

The small white clip that keeps the nozzle cage dowmn is broken. Can i get it replaced?

Mine broke too.. I contacted Seal-a-meal, and for my machine, they don't make replacement parts anymore. BUT, here's what I did and it works great. I place a chopstick across the length of the lock and seal nozzle...I use a little scotch-tape to hold it in place.. When you shut the lid, it applies enough pressure to the nozzle, to start pulling air out of the bags. I do have to lean or push down hard on the lid, to get it to lock into place, before sealing, but the chopstick works wonderful...I am not going to buy a whole new seal-a-meal when this works so terrific. In fact, I just seal-a-mealed 8 bags of beans this afternoon. Try it before you go out and buy another machine.
0helpful
1answer
Not finding what you are looking for?

208 views

Ask a Question

Usually answered in minutes!

Top Rival Kitchen Appliances - Others Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Rival Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...