I cannot access my account as it is asking for k9 password
You Have k9 installed and it is blocking your acess to your router page
here's how to disable it
To disable K9 Web Protection, follow these steps:
1. Download the K9 Web Protection Installer for your system (64bit, or 32bit)
2. Let it download, and instead of clicking "Run" Click "Save" and save it to a location of your choosing.
3. Right click your "My Computer" icon, then click "Properties". When that window opens up click on the "Hardware" tab, then click "Device Manager" when the next window opens.
4. Click the "View" tab at the top of the Device Manager, then click "Show Hidden Devices".
5. Then look for "Non-Plug and Play Drivers" and open up that tree. Then find the device called, "bckd". Right click it, and then click "Disable"
6. A message will pop up telling you to reboot your PC, do so.
7.
After it boots up, there should be a message down in the right corner
saying "K9 Web Protection has become Corrupted" or something similar.
This is good :).
8. Before you can surf the internet, go to wherever you saved the K9 Installer from steps 1 and 2, and run the installer.
9.
It should just pop up with a message asking you to update K9 web
protection, click "Yes" and for the next message that pops up, click
"Ok"
10. Wait a little bit, and then you can go to any Website and acess your router page
11. To re-enable K9 Web Protection, just go back to the device manager and re-enable "bckd".
×