Date stamp on photos for Canon SD100 IS

1. Step 1: Load the image. Open the image that you wish to remove the date stamp from.
2. Step 2: Select the date/time stamp. Zoom in on the area with the date and time stamp, and then mark it with marker or any other selection tool.
3. Step 3: Run the restoration process.

https://www.besanttechnologies.com/training-courses/data-science-training-in-bangalore

The camera will not deface your photos by scrawling a string of digits across them. However the date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

If the photo was already taken then the date stamp is a part of the photo, exactly like any faces that may be in there. You can remove the date using photo-editing software, but whatever was behind the date is lost forever.

You can remove date/time stamp from photos using Inpaint

There is no way you can delete the date stamp from the photos you have taken.
For future photos you can either correct the date or disable insertion of date stamp.

Download any manual about this product by visiting the link bellow. hope it what you looking for.

http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a710_is#BrochuresAndManuals

Thanks for using fixya,

In order to imprint the date stamp on photos, the photo size (L, M1, M2, M3, S, Postcard) must be set to Postcard, and in the recording menu the "Date Stamp" option must be set to Date or Date & Time.

To get the date/time to be on your photos while taking the picture so you don't have to use the software later do this:

When in the mode to take pictures, press the round "Function Set" button and change the recording pixels to "Postcard 1600 X 1200". "Postcard" is the only setting that will allow the time/date stamp to be recorded on the picture.

Then press the "Menu" button and scroll down to "Date Stamp". You can select "Date", "Date & Time" or "Off". You can only do this when your pictures are set to the "Postcard" mode.

Set the resolution to PostageCard (1600x1200).
Many of these cameras have only ONE RESOLUTION setting which allows you to have a date/ date and time stamp on the file, which will print on the viewed or printed photo.

How to do it:
Turn the camera on M mode.
Use the func. set.
go down the menu to the resolution settings. (on the bottom of menu).
Pick only the postagecard (1600x1200) setting.

I also was like you, and had an awful time with a camera I was fixing. I then looked it up on the Net and found an online user manual for the Canon SD 500, which should be basically the same.

You can download the manual from the link below: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=323&modelid=14901 From page 37 of the manual it looks like you can only select the time stamp in "postcard" mode. Also the date & time need to be set in the camera first. Please update the question & let us know if the information given was useful to you - Good Luck!