SOURCE: Food is defrosting in my hotpoint frost free fridge/freezer
Can you hear the compressor running? Is the fan inside the freezer running? It could be that a wire connection has come loose during the move. Was the fridge laid on it's side during the move? If so you probably have compressor oil restricting the refrigerant system. If compressor and fan are running you will probably need a qualified refrigeration tech to check it out.
SOURCE: Hotpoint Fridge freezer FFA90 - Noisy fan top fridge
worthwhile checking closer. noisy fan can be due to fan blade hitting ice if there has been a build-up. otherwise needs replacing
SOURCE: Need a wiring diagram for a Hotpoint fridge freezer
Check Repairclinic.com, it's a good site.
SOURCE: fan not working on fridge section of Hotpoint Fridge Freezer Model FFA90
Fan not working, fridge not cooling anymore, freezer seems ok
Hotpoint Fridge Freezer RFA52 BUT I DONT KNOW WHERE IS THE FAN CAN SOMEONE HELP ME TO TELL ME WHERE IS THE FAN IN MY FRIDGE SO I CAN DEFROSE IT.
PLESAE EMAIL ME ON: [email protected]
MANY THANKS
SOURCE: fridge of my Hotpoint FFA90 fridge-freezer freezes
The fridge gets its cold air from the freezer through a vent(damper) between the freezer and fridge. There is a flap you adjust with the fridge temp. control. Make sure it's opening and closing when you adjust the fridge temp.
The problem could be the electronic control if you have one or the mechanical linkages.
Testimonial: "Thanks, I have checked that, but the vent at the bottom of the fridge section is a rigid plastic grill, which doesn't, nor looks like it should move. "
519 views
Usually answered in minutes!
Sorry this should say clicking noises like a loud relay goin on and of every second
I had new fridge freezer delivered by hotpoint, a new model just released for which I paid more money for and it makes the same dam clicking noise as the first one. Hotpoint say they have heard of this problem and they are sending out an engineer again, I do not hold out much hope. The unit by the way works fine otherwise.
Replacement ff makes the Sam dam noise, engineer out tomorrow, hotpoint have heard of this before so I will see what happens.
Please keep me posted. I would like to keep up on this problem with the Hotpoint unit.
As far as I can find out this is a know problem with hotpoint. The engineer had seen this before and the fix was to reposition the small tubing at the rear so that it was above the compressor and hey it works
Sorry I meant no more clicking noise dennis.
Hotpoint fufl 1080
×