My brother ce 8080 prw is stuck in a basting stitch and will not reverse. How do I reset the computer??
SOURCE: How do I change the stiches?
The brother website has a users manual for it that can be downloaded. Use this link to get it:
http://welcome.solutions.brother.com/bsc/public/us/us/en/doc/manual_index.html?reg=us&c=us&lang=en&prod=hf_ls2125eus&type2=5&flang=English&dlid=
SOURCE: Brother CS-8150 Won't Work in Reverse
Look at the feed dogs under the foot see if they are raised high enough to pull the material through.
SOURCE: Brother sewing machine will not make continuous stitches
first you should turn off the machine and let in reset it's internal programs. Yes the feed dogs are very important. start your machine again...set the feed dogs...unthread and rethread teh machine from start to finish to include taking out the bobbin and replacing it. then make sure you bobbin winding in completely in Un using mode...
SOURCE: My wife has a CE 5000 PRW Inthe window it has a E6
Refer to page 62 of the manual - you can download a free manual from the Brother website - http://www.brother-usa.com/manuals/default.aspx?PGID=3&R3ModelID=CE5000PRW
SOURCE: ce 5000 prw - upper
try changing the needle
also check the top thread tension
check for lint under needle plate
some needles & thread aren't compatable--try this
Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread
760 views
Usually answered in minutes!
×