Electronics - Others Logo

Related Topics:

A
Anonymous Posted on Nov 03, 2012

Sony Betacam SP Error02-694 - Sony Betacam SP Small Videocassette 30 Minutes Digital Betacam SP Tape

2 Related Answers

Anonymous

  • 10594 Answers
  • Posted on Nov 26, 2008

SOURCE: Betacam Sp Error Code

Hi,
It seems mechanical problem and you need to apart unit.
I would advice you to get Maintenance Manual of BVW-75 before to open unit and get help from mechanical exploded section.
Below is picture of Maintenance Manual and part of mechanical exploded view...



4d17155.jpg


a03560f.jpg

It is high end broadcast model and needs care in maintenance.
Good Luck.

Ad

Anonymous

  • 221 Answers
  • Posted on May 21, 2009

SOURCE: Beatcam SP error message

BVW-75 error 09 is "threading motor time out". Look for something obstructing the travel of the threading ring inside the deck (the ring which pulls the tape around the video head).

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
1answer

Sony bvw300 humidity error

Use an hair dryer and warm within the set. If it clears wipe off any dew that has set in . Wipe also the head clear with a good swab. if the fault is recurring then clean the dew switch sensor or replace.
This is found inside the loading compartment , a small square block. about 1.5mm. Helpful. Good day
4helpful
1answer

Error02-694 Sony Betacam Deck UVW-1800

UVW-1800 error 02-694 indicates a problem with one or both reel motors. check the cables going to both motors; have seen failures related to these cables.
0helpful
1answer

Sony Beta sp deck 1800 wont take larger tape down

Most likely problem when a Beta SP deck won't take the large tapes is a bad cable in the cassette housing. Replacement isn't too difficult, and the cable only costs about $20.00.
2helpful
1answer

Beatcam SP error message

BVW-75 error 09 is "threading motor time out". Look for something obstructing the travel of the threading ring inside the deck (the ring which pulls the tape around the video head).
0helpful
1answer

The machine is a SONY VIDEO CASSETTE RECORDER UVR 1400 AR

uvw-1400 error 02-803 is "tape tension error when threading". possible bad threading motor or threading mechanism.
6helpful
2answers

Betacam Sp Error Code

Hi,
It seems mechanical problem and you need to apart unit.
I would advice you to get Maintenance Manual of BVW-75 before to open unit and get help from mechanical exploded section.
Below is picture of Maintenance Manual and part of mechanical exploded view...



4d17155.jpg


a03560f.jpg

It is high end broadcast model and needs care in maintenance.
Good Luck.

0helpful
1answer

I have a Sony UVW 1800 Beta SP deck. This morning, after completing a dub, I rewound the tape. The machine made a sound, the tape stopped and became stuck in the machine. I received an error code 02-803. I...

check your tape deck unit throughly check for any physical damage of REWIND/FORWARD Gears.and FLY Wheel.
and dis locateion of some lever positions.
defnitly you get solved
0helpful
1answer

Sony uvw 1600 betacam sp does not power up

Check the power supply area for the fuses for one. Second, the power supplies in these units are switch mode supplies that require a jump start from a small cap. It is possible that the "starter cap" is defective. There are other reasons for this type of behavior as well. Keep us posted on what you find.
Dan
Not finding what you are looking for?

174 views

Ask a Question

Usually answered in minutes!

Top Sony Electronics - Others Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Sony Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...