Flame does not flicker needs new flame motor
SOURCE: I need a new flicker motor for my heat surge
If you have the old motor in your hands, go to www.grainger.com and they can cross ref. with the name plate data on it, and replace it for you.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c
SOURCE: Charmglow electric fireplace flame does not
You will have to connect a 12v dc power supply to the flame motor. The controller on the board has fried. I built a regulated 12 v dc power supply and tapped it into the bulb circuit so it will power the motor when the bulbs come on. You may have to find an electrician or techie to rig this up safely.Good luck!
292 views
Usually answered in minutes!
×