Cortelco 2740 how does it work? - Cortelco Lands Phones

ring your service provider

Contact your service provider. Explain your situation. They will be able to help.

Hello the Dictaphone 2740 does not have the option for telephone record or conference recording you need the Model that is really similar to the 2740 the model is 2750 this model has telephone record option and conference record capable.

Note: for telephone record you need to buy a separate adaptor like this ECS-DPRC

Hello Just press an hold Erase and Rew Keys.

try replacing handset cord, these cords are generally interchangeable from any other phone

Hello I recommend this place is close to San Fernando
Executive Communication Systems
1445 Donlon Street Suite 1 Ventura, CA 93003 United States or Send an email to [email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem

Hello Just Press and Hold the erase button located on the bottom rigth then press rewind. All the rewind part will be erase.

On the B-2740...located at the end of each spindle (roller) there is a small hole where you insert a special key (bobkey) or a bobbie pin and depress the locking mechanism. This will release the spindles.

The problem is with the capstan motor. More than likely it has developed a 'flat spot' and won't spin up. The clicking noise you hear is the solenoids trying to pull the heads into place, but because the motor isn't turning, it can't pull the heads into place.

Try another cassette. There is a tab on each side of the back edge of a tape which when removed will prevent most machines from going into record. If the tab is there (and not bent in), then the switch at the back of the cassette compartment is dirty or out of adjustment. If you can find a manual for the 2740 (try at www.nuance.com, they bought Dictaphone), it will show how to change the Letter display back to a timeline. Good Luck.