Only display butten working which showing on tv screen in red color words aging 18f7h & one channel working only.please help me.
Aiwa television comes with the option of blocking certain channels
from viewing, allowing you to control which channels people using the
television can view. However, if you forget the code that you entered to block
the channels, you might find yourself unable to watch those channels.
Fortunately, there are a couple of buttons on the television and the remote
that you can press to reset the PIN and customer ID numbers, which unblocks the
channels. Turn
the television on. Press
the "Volume Down" button on the front of the TV and press the
"7" button on the remote at the same time. Enter
in a new PIN code and new customer ID.
Hello,My tv is aiwa.the tv power off ho gaiaa hai and hamare pass remote nai hai please help me.But remote aiwa da nai milda and hor keri company da challu ga.
SOURCE: my aiwa tv-- A219 is
my aiwa tv-- A219 is showing message AGING 2F01H in red color and nothing else except dispaly button is working.pls help me
SOURCE: Aiwa TV MODEL No. TV-A149 AGING
I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.
Its stuck randomly on a particular channel that I was watching at that point of time.
Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH
Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0
The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.
I really don't know anything about this. So, please help me out of this problem.
SOURCE: Dear Sir, I have AIWA
Control with the front panel buttons of ur TV (press the channel or volume button) then displaying error will remove .. It works 100% for me :)
SOURCE: I have AIWA A219 TV.
Hello
Its front panel microswitches are struk. These can be replaced. They are microswitches, which can be resoldered out from the front panel board. For this, you have to open your TV, take out the front panel after unscrewing it from the cabin, desolder one out of it and go with that microswitch as sample. You can bought it from electronic spare part shops at your town. Buy all of them and replace all at same time. This will solve your TVs problem. OK.
1,149 views
Usually answered in minutes!
×