Jenimage jd 3.1 - Jenoptik JD 3.1 Digital Camera

https://www.manualslib.com/manual/286063/Jwin-Jd-Vd745.html?page=3#manual

the real experts on jd combine are the jd technicians so why are you on fixya site to get information

Stx38 JD riding mower Google Search This should help.

check for cracks in the spark plug wire it sounds like it is shortening out or a ground wire.

Hi
That is a fuel problem caused by stale gas you will need to remove and clean the carb with carb cleaner.
Sam

There was a time when my JD just quit and did nothing. After doubting the battery that is what it was-the battery. Jump start your JD and if it starts up then your battery needs replaced.

Jwin JD-VD200 / JD-VD203 / JD-VD500 / JD-VD503

1. (Open the disc tray)
2. Press SETUP
3. Press 1, 3, 6, 9
4. Press LEFT 3 x
5. Press RIGHT
6. A new menu entry appears (Version)
7. Select it and select RC (0=codefree)

1- Open tray
2- Press setup
3- Press 1 3 8 9
4- Use Up/Down key from remote control to change the Region
5- Press setup

Hi,

Some unlock codes for Jwin DVD players are:
Jwin JD-VD100 / JD-VD703 / JD-VD753

1. Press SETUP
2. Press PREV CHAPTER, NEXT CHAPTER, PREV CHAPTER, NEXT CHAPTER, PREV CHAPTER
3. "VerX" is displayed (X=RC)
4. Select the RC with RIGHT and LEFT (255=Codefree)
5. Press RETURN

Jwin JD-VD120

1. Press SETUP
2. Press 1, 3, 6, 9
3. Current RC should be displayed
4. Select RC with UP, "DOWN" (0=codefree)
5. Press ENTER

Jwin JD-VD130

1. Method 1:Press SETUP
2. Press 1, 3, 6, 9
3. Current RC should be displayed
4. Select RC with UP, "DOWN" (0=codefree)
5. Press ENTER

1. Method 2:Open the disc tray
2. Press PROG
3. Press ENTER 3 x
4. A menu should appear.
5. Select RC with UP, "DOWN" (0=codefree)
6. Press STOP
7. Close the disc tray

Jwin JD-VD135 / JD-VD147

1. Open the disc tray
2. Press SETUP
3. Press 1, 3, 8, 9
4. Use Up/Down keys to change the region
5. Press SETUP

Jwin JD-VD140 / JD-VD501

1. Open the disc tray
2. Press 2, 8, 1, 2
3. Use the arrow keys to change the region (9 = multiregion)
4. Press SETUP
5. Close the disc tray

Jwin JD-VD145

1. Open the disc tray
2. Press 9, 7, 3, 5
3. Change the region

Jwin JD-VD200 / JD-VD203 / JD-VD500 / JD-VD503

1. (Open the disc tray)
2. Press SETUP
3. Press 1, 3, 6, 9
4. Press LEFT 3 x
5. Press RIGHT
6. A new menu entry appears (Version)
7. Select it and select RC (0=codefree)

Jwin JD-VD138 / JD-VD504 / JD-VD602 / JD-VD603 / JD-VD745 / JD-VD903

no known hacks

or you can try here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.