Lanier 5627 feeding paper problem

SOURCE: Lanier 5645 SC322 Error

It's most likely your Laser diode (LD unit). You're going to require a tech...see the posts the following link for the same problem. It's for a Ricoh model, but your machine actually is a Ricoh Machine (Ricoh owns Lanier), and is virtually identical to this one -just a generation older.

http://www.fixya.com/support/t1936988-sc_326_322_329_in_af2045

SOURCE: lanier model 5627,fault code SC542 upon power up

try this:

1. Press the clear mode key (yellow key)
2. Use the keypad to enter "107"
3. Old down clear/stop for at least 3 secunds. (red key)
4. Enter the service mode.

5. Exit all the way and turn off.

6. Turn ON

And thats it

SOURCE: lanier model 5627 with fault code sc542 upon power

LOL I think I already gave you a solution try this:

1. Press the clear mode key (yellow key)
2. Use the keypad to enter "107"
3. Old down clear/stop for at least 3 secunds. (red key)
4. Enter the service mode.

5. Exit all the way and turn off.

6. Turn ON

And thats it

SOURCE: What is the service mode for a Lanier 5627?

Why you continue to ask the same things? Why do you continue to put new posts? If you answer when I suggested that perhaps you have your problem solved.