I need to know how to get my dvd player to work on my symphonic tv it doesn't have a tv/ vidio button or the original remote.

SOURCE: can't find aux channel to view vcr/dvd

use vid 1 or vid 2 input on remote should do that if not then use a differ code in your universl for your tv that makes it work or type 00 should get u there another way go to channel 1 and then down arrow it will go into it if not go into your add channel menu and add them then down arrow

SOURCE: SWITCHING FROM TV MODE TO VIDEO MODE

Hi, If the AV button is not in your remote, then perhaps it is part of the Ch up/down buttons - meaning right after your last programmed Channel would be AV before the first program Channel. Although I have yet to come across such a case, I have worked on units/remotes that have this feature of the AV included in the channel memory. Good luck and kind regards.

SOURCE: I cannot switch my TV mode to video mode

I have a broksonic and the remote is broken. I have it on Aux and need it on Video. I contacted the company and there is no way to do this without the remote. I had to buy a new remote from them. The cost was almost $25.00. They are sending it to me and I will have TV again. I did tell them that this is a problem that needs addressed to the company and they were not very receptive to that suggestion. The number to call is 1-800-333-9099. Make sure you have your model number. This is what they wrote in an e-mail when I request assistance: "Unfortunately, our models are not compatible with any other manufactures." I took this as to not try any other type remote.

SOURCE: I HAVE A SYMPHONIC TV AND CANT GET IT TO PLAY A

uyd

SOURCE: Unable to program my Time Warner Cable remote to Symphonic TV

the instructions are on the back of the remote. if lost. you have to:
1) Turn tv on ( i would suggest turning it off then on)
2) Press the Device you want to sync (tv)
3) Press and hold the setup button it will blink once...let it blink twice before you go to the next step.
4) press 9-9-1
5) press the power key on the remote
6) press the channel up (CH +) button repeatedly until the device (tv) turns off.
7) when it cuts off immedieately press the setup button.