Westinghouse WWS833ES Super Capacity Top Loading Washer w/ Precision Wash System Logo

Related Topics:

Posted on Jan 02, 2009

Clogged screen for White Westinghouse washer

White westinghouse washer 8 cycle super capacity, Cold water dribbles into washer. when hose removed, water flows fine from house valve. hot water flows fine into washer. Have well water; believe screen is clogged but cannot find a screen to clean???

  • nancydashner Jan 03, 2009

    I went back and checked the hose...we had not originally seen the screen as it is coned shaped. With a tooth brush and a screw driver it cleaned up quickly and fixed the problem...thanks!

×

1 Answer

Robert Siegel

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 36 Answers
  • Posted on Jan 03, 2009
Robert Siegel
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 01, 2009
Answers
36
Questions
1
Helped
14055
Points
50

The screen is located inside the water valve. you will need to take the hose of of the valve and take a small flat screw driver and pull the screen out

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Water does not drain during spin cycle. Tub spins, but water remains in the tub.

Water pump is out. Will need a new pump.
Only other possibility is your drain hose is clogged check that first.
Drain Pump Part #: AP5684706 Runs about $95:
Frigidaire 137221600 Drain Pump AppliancePartsPros com
2helpful
1answer

White westinghouse 8cycle washer will not spin or drain now it wont do anything model number WW5833ES1 i thought it might have been circuit related so i reset the fuse box and removed the clothes from the...

does it fill with water yet?if so then its the lid safety switch that gone bad under the top lid,this will kill all cycles other than fill,if it doesn't fill with water either then the timers defective
1helpful
1answer

I just replaced the belt on my White WESTINGHOUSE la 560axw2 WASHER. It is now severely out of balance whenever it reaches the spin cycle.

Hi,
The problem may be with the top springs may be damaged you can replace the spring set completely to get the smooth running in the spin
0helpful
1answer

No cold water from washing machine. Hot water is fine.

You have to replace the cold water solenoid valve.
0helpful
2answers

Cold water dribbles in rinse cycle, hot and warm water fine

If you check the warm water flow you'll likely find it is HOT...and not warm. Check the faucet end of hose to see if screen is clogged. Should be screened washer with the dome portion of the screen facing out at you. Remove it and clean with brush to remove grit or scale from screen. If you find nothing there you need to replace the water fill valve located at the other end of the hoses. Good Luck
0helpful
1answer

White Westinghouse model #MWX413REW The

Belts can wear out from: Overloading, old age, or stretching. Sounds like a new belt is in order for you.
To see the specifications and schematics for this machine, and how many belts it has, type your model number into the web-site "SearsPartsDirect" when you are asked to .
God bless your efforts.
2helpful
1answer

White-Westinghouse washer will spin but water will not spin out

no its a remote electric pump,no belt.its ither blocked or fail.cut power,pop top remove frount cover an you will see pump.white or tan.remove hoses[watch out 4 water and check 4 blockage
0helpful
1answer

White-Westinghouse model la450mxw1 top load capacity in Kg.

I called Frigidaire technical support, they informed me that the capacity is 2.7 c/feet.
1helpful
1answer

Washer won't spin

press in clips each corner with putty knife and lift top remove screws bottom front panel slide panel down and off ..locate pump. turn washer to spin and switch on if faint hum felt at pump more than likely plugged with something if pump is running fine ck for something in drain lines..most washers i would say lid switch but on those i believe if switch was bad wouldn't aditate either ck by raising lid ..if agitates with lid raised ck lid switch if not switch ok
Not finding what you are looking for?

342 views

Ask a Question

Usually answered in minutes!

Top Westinghouse Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

vince

Level 3 Expert

2530 Answers

Are you a Westinghouse Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...