Is it possible to play my ipod nano through my Receiver?

Read this...

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821

I assume you want to slave it to the receiver and drive some more speakers with it.

Connect some RCA cables from whichever channel pre-outs you want on the HTR-5860 to any input on the AX-596.

Set the AX volume to something sufficiently high, run through the HTR's speaker level setup and match the AX volume to match the channels on the receiver. Then leave the AX's volume alone.
---

If you just want the AX to have access to program sources of the HTR, run the RCA cables to it from one of the VCR1 or 2 Out (but DO NOT select whichever one you use via the front panel). These are not affected by the HTR's volume controls.

Sometimes volume controls are held on by an Allen type screw, which can become loose, allowing it to fall off. You should see a hole in the knob if it is. You might need a long thin Allen Key to get it back on.
Otherwise have checked my spares guide (though it's a few years old) and it seems Yamaha might only do their own spares.

You need a headphone to RCA adapter cord, and then you just plug it into the headphone jack on the iPod (iPhone) and plug the two RCA plugs (red & white) into any sound inputs on the receiver and you're all set.

Check this link: http://www.google.com/products/catalog?q=headphone+rca&rls=com.microsoft:*&oe=UTF-8&um=1&ie=UTF-8&cid=12037070188082563730&ei=MC1ZS_qCA4SINJ7U3YsP&sa=X&oi=product_catalog_result&ct=image&resnum=1&ved=0CBQQ8gIwAA#

try use 1/4" stereo plug to two RCA plugs used with amplifiers and mixers
[img]http://www.mcmelectronics.com/images/product/icons/magnifier250.gif[/img]
use yamaha cd or aux input ..

Go to the company web site for the remote, there should be code there.

Yamaha av amplifiers have a high failure rate needs to be serviced

You just need to get an audio jack that plugs in your ipod jack (headphone jack) and then goes to audio right and left (the other end is split into red audio and white audio) I got mine from walmart for like $15.00

Hi,


Yes, you would need an iPod to RCA Cable that will connect to your iPod and to the RCA Auxilliary input of the Yamaha HTR-5790 7.1 Channels Receiver. Similar to a Cygnett Groove Transit - MP3 Phone to RCA Stereo Cable or an iPod to RCA Retractable Cable.


Good luck and kind regards.

Are you nuts? You dont need EQ to this system.This is such a nice syetem,inbuilt EQ gives very good output.Don't try to connect EQ if you are not an engineer.It can be connected with external source