F22 code machine won't work! What now?

Yes it is the Door Switch, or its wiring and where is terminates on the control board. Of the board is faulty.

https://www.google.com/search?q=Kenmore+HE2+front+load+Washer.+It+has+F22+error+code

..

Hi try a reset ..cheers

How to reset Bosch Classixx 1400 Express


hi,couldn't find too much detail about the fault , may be faulty brushes an commutato......the abovel ink gives details and how to reset after f22 message

good luck
r

1) F22 mean DOOR LOCK ERROR , this problem can be a) switch for open or defective b) loose wires or broken wires, test by continuity VOM .
2) adjust the Door vs switch very well for propely closed, and test the closed switch.
3) see if the color are missing and put in the WRON terminal.

God bless you

answer of puk code

f22 is a door lock error try this hit cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway.
If you're getting an F22 error, you will want to check anything to do with the door latch switch.

f22 is a door lock error and f28 is a commication error you still have warranty thorugh whirpool. you're going to need pro. help

just remember error codes are always going to be stored on every machine ,, shoukd not have a problem ,, but does it work

TAKE 3 SCREWS OUT THAT HOLD THE BOTTOM FRONT PIECE REACH UP BEHIND AND ON THE DOOR LOCK MECHANISM THERE IS A ROUND PLASTIC DOOHICKEY PULL IT DOWN ABOUT 1/2 AN INCH OR AS FAR AS YOU CAN AND IT WILL UNLOCK THE DOOR. I WOULD UNPLUG UNIT FIRST. I DON'T KNOW ABOUT THE F22 THING. MY JUNKER DOES THE SAME THING PERIODICALLY, I UNPLUG AND REPLUG IT TO CORRECT

thats a door lock failure code try unplugging the washer then let me know shut the door firmley before operating