Question about Pride Mobility Products Health & Beauty
I need the wiring diagram
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Please make sure your charger is okay, can you try another charger ?
the other thing is , the FREEWHEEL lever can it move itself say when you go down a kerb , what are they replacing ? do you have the part ? send me a photograph if you do ?
Posted on Jun 13, 2009
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new batteries. Always replace both batteries at the same time.
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp-hour (Ah) capacity. Use 12 Volt deep cycle batteries.
1.Remove the battery pack from the Travel Scooter.
2.Carefully turn the pack upside down.
3.Remove the eight (8) screws from the perimeter of the battery pack.
4.Carefully turn the pack right side up and remove the lid.
5.Disconnect the black (-) and red (+) battery cables from the battery terminals.
6.Remove the old battery.
7.Place a new battery in the battery pack.
8.Connect the red battery cable to the positive (+) battery terminal.
9.Connect the black battery cable to the negative (-) battery terminal.
10.Position the lid back onto the battery pack ensuring all wires are inside the pack so they don’t become pinched.
11.Carefully turn the pack upside down.
12.Reinstall all screws and tighten.
13.Charge the new batteries for 8-14 hrs before the first use.
I hope this helps and good luck!
Posted on Feb 24, 2010
Hi. The serial number will be on a sticker on the upright support that holds up the seat. You will have to lift of the seat, and take the cover off the batteries to see it. It should be on the front of the deat support. Neil.
Posted on May 27, 2010
Hi. Do you need a basic wiring diagramme for the lights, motors etc. or do you need one for the controller? What faults do you have?
Fisher and Paykel sold their mobility scooter business to Plega Healthcare in Australia. Plega now no longer suport the mobility scooters.
We have some parts left in stock, and were an authorised service agent for these machines.
No one was ever supplied with a circuit diagramme for the controllers.
We do have all the service manuals here and have a full set of the fault codes.
You can email us at email@example.com
Good luck. Neil.
Posted on Jul 24, 2010
Tips for a great answer:
Oct 19, 2017 | BMW Cars & Trucks
Jul 20, 2016 | 1998 GMC Sierra
Jan 17, 2016 | Toys
Dec 22, 2015 | Coleman Heating & Cooling
Feb 25, 2015 | Pride Mobility Products GoGo Elite...
Feb 13, 2015 | Pride Mobility Products GoGo Elite...
Sep 04, 2014 | Pride Mobility Products GoGo Elite...
Jul 25, 2014 | Pride Mobility Products GoGo Elite...
Mar 01, 2014 | Pride Mobility Products GoGo Ultra X...
The wiring diagram shows the wiring color code, Power rating
and connector plug used. The wiring diagram explains the vehicle's electrical
connections with color code. It's a bit complicated to understand.
Apr 07, 2013 | 2001 Cadillac DeVille
Jul 07, 2019 | Pride Mobility Products Used Jazzy...
1,051 people viewed this question
Usually answered in minutes!