I have a necchi sewing machine, and it has full power to it, but when i push the foot pedal to go, the needle only goes up and down really, really slow. if you pump the foot pedal, it will keep going. is it my foot pedal? I have checked and cleaned the bobbin area and everything else is fine.
Sounds like the contact in the foot peddle has failed try a new peddle
Some options to consider are the machine may have a bind. See if you can easily turn it by hand. If it turns easily I would check the foot control. I test them with a jumper wire across the contacts on my test panel. This should make your machine run full speed when you by pass the foot control. The other option is a faulty motor. I would not start replacing parts until I confirmed the bad one.
Sounds like your foot control is faulty.
I can supply foot controls for 99% of sewing machines.
Mike
[email protected]
http://www.sewingmachineswales.com
1,116 views
Usually answered in minutes!
foot pedal very slow when pushing it
I have a Pfaff 1029 tiptronic sewing machine and the foot control has lost its sensitivity. It either goes on full when you push it right down or not at all. Are there parts I can get to fix it? - Bruce
Use foot pedal and sewing machine runs slow and then stops I keep hitting pedal and it jusst s goes at half speed and then down to nothing
×