I have a ts 1440 power acoustik amp and the protection light is on. and i already have an amp in my car and i used the power and ground from that. and the amp that im trying to hook up the red protection light is on. the rca's and speakers are not hook up. so please help me. thank you for reading.
Go to power acoustiks website at: poweracoustik.com then tech support look at how to insatll an amp
I had one of these amps, if you don't have a good ground, the protection light will come on.
611 views
Usually answered in minutes!
ok guys ive got a quite a bit of experiance with car audio,but this ones got me stumped
ts-1440 power acustik will work when connected to a 12 power supply (ie: 120v ac to 12v dc converter) but when connected in my 99 ford f150 the power light will not come on unless the rca line is connected but comes on in protect mode when they are. any idea's?
I have the same issue, everything was hooked up and then one day it stopped working, threw the red protection light and it hasn't fixed itself yet. I checked the ground and its strong and re-traced all the wires and can't seem to figure out what is wrong.
i used to have the same problem with the rca's it was my ground wire. double check the ground wire that you have is getting ground
i have test diode and i have good ground cuz my other amp works fine. please help me and i know that i have bad english :/
i have test diode and i have good ground cuz my other amp works fine. please help me and i know that i have bad english :/
×