My phone code wont work

If this is a "fly by wire" throttle, the throttle plate may be dirty and not closing all the way at idle. This can cause a conflict in the computer between the TPS reading, and another sensor. Usually, this will cause the engine to shut down, but weird stuff can happen. Not really familiar with run time error. Ask a dealer service tech what usually sets this code.

repair imei with printed on label

This happened to me earlier this year. I took it to At&t and they couldn't find anything wrong with my phone. So they gave me a brand new one. I've had it for about the same amount of time and it is doing it again. I'm not sure what to do. Considering i'm not with at&t anymore, they probably wont do anything.

Have you tried a boot up disk? Re-setting your CMOS by hitting a special key as soon as you turn it on? Also try hitting the F-8 key after turning it on for a menu that may help.

get a trouble code . it seems like a fuel sensor problem or EGR valve. You can get a trouble code at AutoZone or other parts stores for free.

Make sure the drivers are up to date thats the usual place to start with Graphics issues.

Look carefully at the jack the phone and all your other phones are plugged into. Water or corrosion on the data pair from any location make Panasonic systems go crazy.

Carl

I had the same problem when my message memory was around 90% full. I just deleted stuff and the phone stopped behaving like that. Check if that works with u! (Y)

Hi, probably eprom corrupted. Probably needs processor replaced or reprogrammed.

you both should just have the phone replaced from where you both the phone from.....it is still under warranty...so the problems sound like the mainboard is having issues, you could get the phone's firmware reflash but seeing that the warranty is still good , just have it exchange for a new one.