Error c9401 minolta bizhup 164 - Konica Minolta bizhub 161f All-In-One Laser Printer

Minolta bizhub 164 error code C2558 how can solve

c9401 means the lamp that the scanner uses isn't turning on.

Thread Konica minolta bizhub C351 error code C9401

Scanner lamp assembly, that is the bright light that come on the document feeder, there is a problem with it. Need to be replaced. or the control board needs to be replaced. No reset

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

over my head

Yes what about it????

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

help me my konico minolta bizhub 184/164 error (C2558)
my mail id - [email protected]

my machine konica minolta C252 is giving the code 9401 how should I resolve and what is

Hello,

Try this steps

The output from the CCD Sensor is a predetermined
value or less during CCD Sensor gain
adjustment.

1 Check the flat cable for proper connection and
correct or change as necessary.

2 Change PWB-C.

Please let me know if you have any further questions or concerns.

Thanks.

Not exactly sure if the model is the same but on a C351 the C9401 & C9402 errors are as follows:

16.6.81 C9401 Exposure lamp failure to turn on
16.6.82 C9402 Exposure lamp turning on at abnormal timing

Parts to check:
Scanner Assembly
Flat Cable
Image Processing Board (PWB-C)
Step Action

Corrective steps in order of suggestion:
Check flat cable for proper connection and correct or change as necessary.

Change Scanner Assembly if necessary

Change PWB

Something with your developer causing not enough toner. Maybe an auger issue in the developer or in the toner feed itself?