Projector displays reverse image also has grayish purple color

1,white spots appeared on screen,means the DMD chip is broken,you need a new DMD chip.I supply the DMD chip and the price is USD200
any questions, feel free to contact me
We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
have a nice day!
Jerry,Lampdeng Limited

Dear Luismprida,

please email me,

i have the color wheel of this model what you mentioned,

last week, we just expressed 2pcs color wheel to a friends from Sweden,

my email: [email protected]
waiting for your feedback

best regards,
Jacky

go into the menu, in the image adjustments, and there should be a screen adjustment, and select front (and non ceiling).

1st you have to connect your cables correctly, than set up your contrast in 50 if your contrast is in lower level, than adjust the sharpen and brightness with perfect adjustment remember do not place it near a woofer or speaker

For reminding me : [email protected] dim

By selecting Source in menu you can go to Mirror and select the posistion you want the image to be IE: front, rear , ceiling, floor

Use a standard "video cable" that is used to connect a desktop to a monitor. Your lap-top will also have a similar video out - this is a blue colored outlet jack on your ap-top with three rows of 5-pin holes. The BenQ also has a similar blue receptor jack almost next to the place where you plug in the mains power cable on the rear of the unit.

Hello!!
Am reall sorry for yesterday's my browser got crashed suddenly .. so i couldn get back to u soon .. have replied to u in the chat .. u check it ... 

Check the cables connected to the back of the projector. reinsert the cables a few times to get a good contact. Jiggle the connection at the projector to see if there is a bad connection, do this while viewing the image on the screen. If everything is good and no response to the connections, It might be the main/input board is bad and will need replacement.

Hi rgomez

I've requested the info from BenQ HQ and will give you feedback as soon as I get an answer.

I'm an Authorised BenQ Service Provider , so this is quite easy for me to find out.

Speak to you soon !

The projector needs to be turned on first, then connect it to the laptop. If the picture still does not show at that point, press the FN and the LCD keys on your laptop at the same time. This should work.