SCRATCH ON BLUE BEZEL OF WATCH

Hi thank you for answers but it doesn't help me given I already have the bezel off. What I actually need is the actual size of the Spring? I know they are available to buy on eBay and watches.com.uk but to not even bother to respond to you inquiries for some reason?

Does anybody know the correct size of the "friction/ ratchet bezel spring" on a Tag Heuer WAC1113.ba0850 model 2004 - 2007 ?

The bezel is available through any certified Seiko dealer, though I would suggest using one with a Certified Master Horologist on staff.

Thanks for rating! Expert watch repair for Rolex Breitling Tag Heuer Movado

whats the problem are you trying to fit the new bezel? you will also need to ensure the bezel retention spring is with the bezil

I would contact Tag for this one. Most watch vendors will provide them at no cost. Be prepared to give them the #'s on the back of the watch to ID your watch.

http://www.tagheuer.com/

Good luck.

Yes, there are special spring under the bezel, not the bearings. Bezels are stuck/not clicking because they are broke/worn out or very dirty. I would not advise to take off bezels, unless you have replacement springs and proper tools to fit the bezels back on watch. You can find bezel springs on Ebay, or visit your closest watch repair shop and ask them to order springs for you. Rate me, plz.

YOU have to buy new one. Will be costly. Check out e-Bay. Cheapest prices are there.

push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

I'm sure any watchmaker can do it for you. I've had one pop off an old one for me an replace it with a slightly used one he had. I would like to replace that with a new one. They're available in the UK, but they're pricey. Ebay is an option.

Hi Dude, it's one of those things your going to cuss once you know. Just unscrew the Bezel.Thats it. Steve