Cannot access certain sites

type 192.168.2.1 in the address bar of your browser...
it will open the configuration page...

click here for screenshots...

if u have any issues comment back i will be online for next 2 hours...

you have to ring belkin and they will talk you through opening the releveant ports to access x box live. If you dont have a microsoft wireless adaptor (which they say you need) you can use a hard wired connection from another computer by creating a network bridge. either way you have to open the ports on your router.

You need to find out what settings need to be changed in the router to communicate to the new modem. Etisalat should have some type of instructions on how to configure it...Does the IP address get obtained automatically or is it manually configured. Does the modem require authentication..like a password. Did they replace the modem or just upgrade the system? You may just ahve to reset the modem and router to get reconnection. Most routers use the IP address of 192.168.0.1 or 192.168.1.1 to get to the router settings control panel. Just enter one of these addresses on internet explorer and a screen should ask for a password. The default password is usually ADMIN but consult the routers manual for instructions. Once you are in the router control manual you can configure the router to work with the new system.

You need to first plug the DSL modem into the router. log on to the router. Configure the router byusing the user name and password as supplied by your dsl provider. once the router connects to your dsl provider, you should be able to connect your playstation to the wireless network.

If you have the model number of the router you can go to this site and download the drivers.

http://www.belkin.com/support/?lid=en

Have a great day...
Tim

- Nope, it is not possible, you may need an Access Point to do it.

you could try updating your router's firmware.. it fixes a number of bugs and makes the web interface multi-lingual. This version supports English, German, French and Spanish.

You need to have an Internet Service Provider. You connect the router to a modem from the cable Service Provider or through the phone line for BT. Then you can connect wired or wirelessly to internet through the router.

If you describe your set up in detail and tell me the Internet Service Provider I may be able to help more....

You could try adding the ip address to the router's allowed list.

Try setting the MTU size to 1400 and also check if there's any firmware update for it if there is update the firmware.
Hope it help