Error code e13 - Frigidaire ATF6000ES Front Load Washer

• Error code E13 error showing on display
• What causes an E13, E 13 error code on the Induction Cooktop control panel?
• Error code 13 on Induction Cooktop control panel

Cause:

• Universal OFF key failure

Troubleshooting:

1. If the controls are wet or water made contact with them, dry off the controls.
2. Turn off then back on to reset.
3. If the error persists, reset the unit at the circuit breaker.
4. Turn the unit back on to see if the error code cleared.

Hello friend, that's a great question!

Based off what you have provided your Frigidaire oven is displaying an error code of "E13" and you would like to know what is causing this problem. The error code "E13" stands for a bad EEPROM (Erasable Programmable Read Only Memory) and this could be an issue with the UIB (User Interface Board). This electrical component may need to be replaced however this is not a simple DIY job. I would recommend speaking with a professional technician for proper diagnosis and repairs. This will prevent you from making unnecessary part purchases. -Matt