Dishwasher destroyed bowl

GENERAL ELECTRIC FOOD PROCESSOR MODEL 106622F WORK BOWL

I was able to locate a bowl for the 106622F processor on E -Bay. You may be able to find a blade on E-Bay. From what I gather, there is no source for replacement parts, other than used parts. I hope this helps ! Good Luck....

Hope you've worked it out by now, but there are 2 notches at the bottom of the bowl that slot into the base. To remove the bowl, take the lid off and rotate the bowl clockwise so the notches disengage from the base, and simply lift it off/. I assume if you couldn't do this the bowl must have had a lot of gunk stuck in the notches which prevented it from moving - yuk! I put my bowl and lid in the dishwasher - no prob.

Available parts for the Black & Decker FP1300 Quick N Easy 8 Cups Food Processor can be found here:

http://www.directpartsandproducts.com/food-processors-fp1300-c-1_378_405.html

Try these people:

http://www.thegourmetdepotco.com/store/default.asp

call 1-866-925-PART
ask for part number
175727-00

Try putting in the dishwasher, if you dont have one, try letting it soak in very hot water to sterilize it.

Items required:
-dishwasher
-detergent
-lemonade or other citric liquid
-poochy
-skillz

Step 1:
gently position poochy around tube in center of bowl. Fill halfway with lemonade or other citric liquid.

Step 2: Put lid of processor on and put entire unit in dishwasher. Turn on power scrub cycle.
The dishwashing cycle will help the citric acid to activate the poochy.

Step 3: Use skillz to wriggle the bowl off the processor. Empty out poochy remains.
Congratulations! YOU'VE GOT SKILLZ!

I would not reccomend it. The water, soap etc is safe, but the heat drying process risks melting parts, and they are surprisingly expensive to replace for being plastic.

-Tha Mp3 Doctor

Europro has parts.

KFC3100 Manual is posted at http://www.kitchenaid.com/assets/pdfs/product/ZUSECARE/9705624.pdf