Some dvd's aare not getting played its showing incorrect region code please help me
This is for DVP31XXX series i hope it works all on DVP31 series. It has been tested on DVP3146K /51 and it has been worked...
1. Make sure there is no disc in the player.
2. Turn power off and on again.
3. Open the tray.
4. On the remote, hit 9879 and then 0. This changes unit to Region 0, meaning it'll play all regions.
5. Hit OK on the remote.
Good Luck Guys!
Press setup, go down to the lock symbol. do not enter it, just have it highlighted, then press "0" seven times. this will make it region free. also applies to most LG DVD players and DVD recorders. Hope it helped, murderface.
Many customers want to play DVDs from other countries, or that they bought overseas. Our DVD players will ONLY play dvds from Region 1. On the back of the DVD case, there is a small symbol, it is a picture of a globe with a number on it. That number MUST be 1, or 1-5. If it says anything else, that DVD cannot be played. It also states this in the manual. Customers may ask how to change the region code in our players. We cannot advise them how to do it, and as far as Samsung has informed us, you cannot change the region code. Other players may have this ability, or they may say they can find this out online, but we dont know how to change this, or if its even possible. Refer the customer to a dealer to inquire about multi region, or region-free DVD players, which Samsung does not make. Region codes prevent DVD players bought in one geographical region from playing DVDs bought in other geographical regions. There are 8 regions (also called "locales"). Manufacturers usually mark players and discs with the number of the region with which they are compatible, superimposed on a world globe. DVD players have only one number. Discs can have more than one or, in some cases, none. Discs with no region code numbers play on any player in any country. A DVD player's region code is incorporated into the firmware of the DVD player by the manufacturer. It cannot be changed by the customer. A list of region codes and regions is below. REGION CODE REGION 1 USA, Canada 2 Europe, Middle East, Japan, South Africa 3 South Korea, Taiwan, HK, ASEAN 4 Australia, NZ, Latin America 5 Ex-Soviets, Indian sub-continent, Africa 6 China So your next question will be, can I change the region code? DVD movies have region codes, and they typically only play on a player or DVD-ROM drive sold in the country where the DVD movie was sold. The DVD player or drive has a region code in its firmware. Personal computer DVD-ROM players often have the code in the software or MPEG-2 decoder. The two codes must match for the player or drive to play the movie. Region Codes cannot be changed by the end user. Doing so will result in firmware damage.
My philips dvd player show me this error
wrong regional
please help me
I have a Samsung E136B DVD player purchased in Dubai, I need the country codes to enable me to view Imported DVD's - pse assist.
Try http://www.dvdexploder.com/how.htm
Costs $10 but well worth it.
Region codes can be changed on most DVD Players without any harm to the player. They can also be changed on PC players but if not small software programs can be found on Google that change the region for the dvd that is being played.
You can change your region codes some do it easy some a little more complacated i will give you some weg sites that are free to use no fee like most http://www.regionfreedvd.net/player/pioneer.html
http://www.regionfreedvd.net/player/samsung.html
these are just for two make but if you change name of make in web address to your model will be able to find yours.
I think ur dvd is older virsion,, in case u change region ,i hope it ont work,for all disc,, not worth.
SOURCE: incorrect region code
This is how to make Philips DVD 622 region free so that it can play VCDs from all regions.
*Open CD tray by holding down "stop" button on the remote.
*Enter 2812
*Hold down "OK" button on the remote till 9 appears in the TV screen
*Turn off power of your DVD player
*Turn your DVD player on and it is region free now
SOURCE: unlock region code
Keep Tray in eject position
Press Setup from remot
Go to preference page
Press"138931"
Using Navigation Key chane region code to "0"
Press "OK"
OR
open tray
press 98790
SOURCE: DVD622
Open the tray NO DISC
Press 2812 on the remote
Continue pressing OK till you get 9 displayed on the screen
Power off and switch on.
The player should now be region free
4,113 views
Usually answered in minutes!
I was wondering if you have any unlocking code for my JVC DVD Player - XV-N212, as I'm struggling to find one.
Lost the original remote to Philips 622 dvd player and some how the region code was changed, now it just says incorrect region code and cannot play anything. How do I change with a universal remote?
need the codes to unblock de region
i have the same problem of wrong region code for my audiovox d 1917 dvd pleyer
i have the same in correct region code for my audiovox dvd player
region code unlock?
A dvd from mexico that I bought to work on my spanish won't load. I want to know how to change the region code of this player
Some DVD players do not play DVDs recorded on my LVW 5006 recorder. How do I set regions?
i want to change region code on my dmres30v combo can any one help please,i have an allforone remote,thanks,
PLEASE ASSIST ME, I NEED TO CHANGE THE REGION CODE ON MY DVD PLAYER MODEL DVP3146K. THANK YHOU
I HAVE A DR-MX1S AND WANT TO MAKE IT MULTI REGION,
CAN ANYONE HELP WITH CODES PLEASE
how do i change the region code on my symphonic-wf 802 thanks for any help
need regional code for standard lg dvd player
aparece en la pantalla invalid region
Ive bought a dvd from U.S.A and need to have the region code so I can play it. Model number is Sharp DV-SL10, serial number is 304922708. Could you please help me to crack this code, thanks
dvd player says wrong regional code
my coby 227 dvd player says wrong regional code. it never said that before
I do not know where to go on my pc to change the region code. Please help!
I need help. I gdo not know where to find the region codes on the computer.
changing region code
wrong region says my dvd player
Any time i put in a dvd it would dvd then incorrect region code right under it
when ever english DVD is put it shows wrong region why?
and how do i rectify
guys i have Philips MCD122/98 gives disc region incorrect how the hell can i resolve this out pleaseeeeeeeeeeeeeeeeeee
×