What is error code e5e - Frigidaire GLTF2940ES Front Load Washer

Hey friend, thanks for your inquiry!

I see your Frigidaire washer is displaying an error code "e5e". However, it appears "e5e" is an invalid error code. Let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes.

If resetting the power does not correct the issue, could you please inform me of the new error code or if your dishwasher continues to display "e5e" you may want to seek assistance from a professional for proper repairs. -Matt

Hi Friend, this is Z. Thank you for your question!

Typically error code E5E indicates that your Frigidaire washer is experiencing a communication problem. Base on the intensity of the issue, I suggest contacting a professional technician to accurately repair your washer. Typically, a technician will need to check the wiring between the main control board and the speed control board. Depending on the diagnoses and if the wiring is bad, it has to be corrected. However if the wiring is good the main control board may need to be replace or if the problem is not corrected, the speed control board is possibly faulty.

Good Morning Eric, this is JK. I understand that you are receiving error E5E on your dishwasher. It appears the error code you are receiving indicates there may be a communication problem. Check the wiring between the Main Control Board and the Speed Control Board. If you find the wiring is good, you may need to replace the Main Control Board. If the problem is not corrected, consider replacing the Speed Control Board. Hope this helps!

washer stopped working, displayed E5E error when prompted for code. I opened up the back of the machine and noticed that a connector was not connected to the control board, i removed the control board to get a better view of where it belonged, and slid the connector over the control board, closed up the machine and it's back in business.

E5E is for the control board failure. Here is the replacement part.

All parts come with a 365 day, any part, any reason return policy.

I was wondering did u ever figure this out i have same code ...but mine will run a little water then drain and never spins but got the code E5E too

Hello barnessursula - Typically error code E5E indicates that there is a communication problem. Base on the intensity of the issue, I suggest contacting a professional technician to accurately repair the unit. Technician will need to check the wiring between the main control board and the speed control board. Depending on the diagnoses and if the wiring is bad, it has to be corrected. However, if the wiring is good the main control board will need to be replace or if the problem is not corrected, the speed control board will need replacing.

this is a communication error between the main contorl board and the speed control board check all the wiring harness and make sure they are in good order.replace the main control board if the problem continues replcae the speed control board

I don't know what the E5E error code refers to but I can think of at least one possible reason for no motor action, even if motor itself is ok and board has been replaced. The relay itself could be faulty with no power from the output side, even if it clicks on. Less likely but still possible would be a faulty overload protector at the motor.