Bizhub 600 sit bian

This will help you out!

http://www.manualslib.com/manual/90114/Konica-Minolta-Bizhub-600.html?page=375

When you reinstalled the upper and lower fused rollers mite have flipped the sensor so it's not riding on the fuser roller

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

1. Remove the toner bottle then turn on the machine with out bottle inside of it. Let it go though its normal operations then when the machine asks for toner install the bottle.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Which password the admin or the individual passwords Default admin 12345678 or 00000000
Go to:
Admin setting- Security setting -admin password

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check these threads:

http://www.fixya.com/support/t17149325-fix_code_c_2105_in_konica_minolta_bizhup

http://www.copytechnet.com/forums/konica-minolta/60158-bizhub-750-c2105-error.html

Be carefull with the corona.

is it a Di250p or a bizhub 751.750/600????

Please send me konica minolta bizhub 600 full service manual and help us this code c6708 still and my next machine bizhub 750 still warming up why problem this machine please help and send me your email address.
i want to talk to you continuous

Is tray 2 OK?
Any paper stuck behind the draw. Check the setting off draw one in user mode is it for that size paper?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

When the last time the machine was cleaned in the drum area along with the associated sensors, when was the last time drum and developer replaced, every 250,000 copies drum developer should be replaced.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

first toner must must and must be genuine, other wise it wont work in any conditions,
2nd toner density sensors and gamma sensor should be cleaned and all auto setting must be run .
third some time toner drops down the others side of the drum due to recycle clutch did't not work properly and all cleaned toner drops down after filled in recycle area,