What grapic card will set for AsRock 775i45gv

try a differant monitor if not working then its the board get a new one.

http://www.asrock.com/mb/vga.asp?Model=P4i45GV R5.0

Visit this site for a list of supported Video cards. Your 3650 is not one of them.
Look around this Asrock site, , you may find a bios upgrade which may help support it.

Hi

It doesn't seem that there are Windows 7 drivers for your motherboard (I'm assuming you're talking about your onboard graphics) - See here.

The best option you have is trying to install the VGA drivers for Windows 2000/XP and hope that works. Otherwise you're going to have to revert to Windows XP for your grapics to function correctly.

Another option you have is installing a 3dcard on the motherboard. Click here for a complete list of graphics cards supported.

Good Luck,

-LL

Hello.

The ASRock 775I45GV motherboard supports the ATI Radeon 9550 Graphic Card.

Please visit this site to download the drivers.

http://support.amd.com/us/gpudownload/Pages/index.aspx

Please select Operating System, and model of Graphic Card.

After downloading the drivers, just run the setup program, and you will have installed the drivers (note it requires .net framework and a reboot after installation is complete)

Hope that Helps.

Try cleaning the RAM as shown in the image below:

also you can try resetting the CMOS, here's how it's done on your motherboard:

CLRCMOS0 allows you to clear the data in CMOS. The data in CMOS includes system
setup information such as system password, date, time, and system setup parameters. To
clear and reset the system parameters to default setup, please turn off the computer and
unplug the power cord, then use a jumper cap to short the pins on CLRCMOS0 for 3
seconds. Please remember to remove the jumper cap after clearing the CMOS.

The location of the CLRCMOS0 on the motherboard can be seen on the image below. (labeled no.10)



If problems persist. Replace the RAM. Hope this helps.

According to the Asrock website this card is not supported on this motherboard. Chris http://www.motherboardsrus.net

Hi st_niclaus,
(Note: ASRock does not list the FX 5500 series AGP graphics card on their web site).
To confirm this please see the VGA supported list at ASRock, click this link:
http://www.asrock.com/mb/vga.asp?Model=775i65gv&s=775&c=VGA
There is an order that should be followed when upgrading from using the onboard video to the AGP card.
Check your bios setting. See Init. Graphic Adapter Priority page 27 & 28 in manual.
Set to: [AGI/PCI/Onboard].
Also see instructions on how to install, AGI slot: on page 17.
AGI = ASRock Graphics Interface.
If your display still does not function after making these changes, it is possible your FX 5500 is not compatible with your board.
(Suggest you buy one from the list provided by ASRock's supported link above).

Good luck st_niclaus!

Mike

Hi sandesh8, did you know you can increase the memory size of the onboard AGP card above the 64MB? Page 26 in you're manual. If you install another AGP card into the opened AGP slot, please go to this site & only use the recomended AGP cards in the Asrock list. Click on this link: http://www.asrock.com/mb/vga.asp?Model=P4i45GV%20R5.0&s=478&c=VGA
This is one of very few video cards found on the list with 256MB of video memory.
http://www.amazon.com/nVidia-GeForce-FX-5700-5187-6725/dp/B000RPKI28

Good Luck!
Mike

your grapics card is 128mb. and the most new game wont a 256mb grapics card and an avaible 1gb ram or more and your card is an onbord on you can't replace it.

Try plugging the monitor to the onboard video card and then enable the graphic card in cmos settings.