Conversion instructions from crib to full size bed

Did you try to look for the manual from manufacturer site? Usually they will provide download manuals for their items,

F32701.03 is the model for your crib. Are you trying to convert it into a full size bed? Baby's Own Room sells the full size conversion kits.

I can't offer the exact answer, but hopefully my suggestions will be helpful...

Converting the crib to a full-size bed should actually be a fairly simple process of detaching the 4 sides that make the crib, and replacing the 2 short sides with the full-size bed rails that were sold separately in a conversion kit. The 2 long sides of the crib become the headboard and footboard of the full-size bed.

Unfortunately, it's only a simple process if you already have the full-size conversion kit bed rails. And since Morigeau-Lepine went out of business, they aren't making any more conversion kits. If you don't have the full-size bed rails, then this could be quite difficult.

It's possible that some stores that used to sell Morigeau-Lepine cribs might still have a conversion kit hidden somewhere in the back of their stock room or warehouse. You could try calling around to a few of your local stores to ask if they would check for you. It's a long shot, but it doesn't hurt to ask.

If you have the rails, or are lucky enough to find them, then it should be as simple as locating the screws that hold the crib sides together, removing them (most likely with an appropriatly sized hex-key,) and putting the screws back through the headboard and footboard into the bed rails. (I'm really just assuming that it works the same as the Babi Italia conversion.) If no screws are visible, or if removing them doesn't detach the crib sides, then they are probably also held together with locking bed rail fasteners. To release the fasteners, remove any visible screws, then push upwards on the short side rail while pushing down on the long side rail. You might have to tap the rail up with a rubber mallot to get it moving.

If you don't have the full-size bed rails, and you can't find them anywhere, your only option may be to build them yourself, or find a woodworker to build them for you. Search online for "Bed Rail Fasteners" and you'll see several options for hardware, but they might require modifying the headboard and footboard as well. Full-size matresses are 75 inches long, so you'll want the length of your rails to accomodate (ours are 77 inches long.)

I hope I've been helpful. Good luck!

Instructions for converting a Munire Majestic Crib into a full size bed can be found on the manufacturer's website. You can also find detailed tutorials and videos online that explain how to complete the conversion.

I know its been a while but if you're still looking for the toddler rail or even the full size bed rails call Lajobi (the manufacturer) at 888-266-2848 or email them at [email protected]. I bought this same crib in 2006 at Baby Depot and I ordered the toddler bed rail through them in 2009 for around $60. Now I'm ready for the full size bed rails but the crib has been discontinued. The manufactuer has a compatible bed rail in the same tea stain for $149 plus shipping.

Hi!

As lots of cribs-stage from Storkcraft, your bed instructions are permanently attached on the board, below the mattress. And for the almost beds, the mattress frame has to be purchased separately, to convert it to a full size bed.

If you would like to have the copy of yours instructions, go to http://www.storkcraft.com/products.aspx?cat=cribs-stages to find your model and save its instructions in pdf in your computer. Good luck!

Did you get an answer to your question? I have the same problem.

To convert your crib to a Full Size bed you will need to purchase a set of full size bed rails (hook style for headboard and foot board). You can find this at any discount mattress store, or furniture outlet, it can range in price from $39.99 - $99.99. To install the rails you will see slots with bars on the headboard/footboard, this is where the hooks on the rails slide into. There are no bolts used to secure the rails to the headboard/footboard.

Jardine enterprises does not make a wood rail kit as was shown in some of the earlier ads for the Madison line of convertible cribs, and do not waste your time ordering the rail kit from Babies-R-Us as it is simply a metal rail kit (which you may be able to get cheaper at a local furniture/mattress store).

Use the lower daybed rail between the two front posts for the foot board. Another option for the full-size conversion is to purchase the metal rails (hook style) for a headboard only and not even bother with a foot board.

If you are still unsure of what you need to do for the full-size conversion please feel free to email me at [email protected].

Mother's Choice One Stop Baby Shoppe has the rails to convert this. I got mine last week.
416-285-0334