It would help to know what type of machine it is. And if the switch is a moving machanical switch or digital ? If it is a moving machanical switch it might be wore out, and replacing itmight be all it needs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power switch cold be broken and not working.Check to see if the filter is clogged and check for a clogged hose or filter and unclog the hose and replace the filter.
Do all brake lights stay on including high mount? If all stay on suspect problem with brake switch located at brake pedal. If just lower brake lights stay on ( not including high mount ) expect problem with multifunction switch ( signal switch )
Slide levers like that usually move a cable. When they will not stay in place it usually means whatever they move is binding up. I suspect your heater valve is binding.
with the pedal switch off the lights would stay on...they only go off when the switch in depressed...if you depress the switch and they stay on then you will need to replace the switch
there is a "contact switch" that when there is power in the system, it stays down. If hte contact switch is bad, it releases and will not stay down. COntact switch needs to be replaced, unfortuantely I have the same problem and can't seem to get the part.
under the dashboard on the drivers side. look at the brake pedal lever. there should be a switch attached. push switch in and twist to remove. then pull the button as far out as it will go. while holding brake pedal down reinstall switch. then pull pedal up to top. this will reset the brake light switch. if they stay on still, then just replace the brake light switch.
×