During scheduled recording for 1 1/2 hours, chanell changes

Try to fix it or buy a new one

I found this solution on one of your old notes (but a different machine). I set up a scheduled record for 11:59 PM to 12:01 AM for the current day, then set up the scheduled record for the next day. The VCR recorded both the initial 2 minute session and the later one which I wanted to record.

Do the first time setup and when it asks how you receive the rf signal select no as the answer, this will allow you to record directly from your cable box but you won`t be able to record and watch another channel.

Sounds like it is defective I just came across 2 bad scandisk cards both 2 gig.

I have the same unit w/ a different problem. I called pan @ 1-800-
211-7262 and talked to John @ ext 5070. He seemed very informed and sent me a CD update which fixed my timer recording
mode. My unit is about 18 months old and the CD was sent @
no charge. Give him a call, maybe he can help.

Dear lost366,
The problem lies with micro IC (cpu IC) . This has to be replaced. Please contact authorised service centre.

Hi David,
i,ll try my best.
The best suggestion i have is 1:) take the batterys out of the remote, and leave out for about 12 hours. this should reset to factory-default.
also power off the dvd player. unplug and then replug in and setup again.
Finally try changing the tv output selection. i,e scart/aux/av et,c.

hope this helps you out.

regards Mike @ compurepair.

Daylight savings time change a few months ago messed up the timer recording schedule - you must now fix it. Daylight savings time changes will always mess up this recorder. You must reset your recording schedule.

For more info on fixing, go to:
http://shop.sirius.com/edealinv/servlet/ExecMacro?nurl=control/StoreItem.vm&ctl_nbr=2640&siId=1745656&catParentID=7874&scId=7874&oldParentID=&cid=SL100PK1

2 other remote possibilities:

If no signal is present at the time the recording is scheduled to start, the recording will be skipped.

Make sure you have followed all instructions on pp. 55-58

-Tha Mp3 Doctor

Daylight savings time change a few months ago messed up the timer recording schedule - you must now fix it. Daylight savings time changes will always mess up this recorder. You must reset your recording schedule.

For more info on fixing, go to:
http://shop.sirius.com/edealinv/servlet/ExecMacro?nurl=control/StoreItem.vm&ctl_nbr=2640&siId=1745656&catParentID=7874&scId=7874&oldParentID=&cid=SL100PK1

2 other remote possibilities:

If no signal is present at the time the recording is scheduled to start, the recording will be skipped.

Make sure you have followed all instructions on pp. 55-58

-Tha Mp3 Doctor

Solution #2 posted on Feb 09, 2008
jdrrwoods
Rank: Wiz
Rating: 84%, 12 votes

http://www.altex.com/product_info.php?products_id=9207 here is a link to a audio / video switch box you need one of these make sure it has several audio video in and at least one audio/video out
hook all you rca cables up to the audio/video in from the cable box, tv, and dvd/vcr combo then out to the surround sound youll also need to get some rca cable splitters for the out so you can run it back to the audio/video in to the tv as well as the surround sound here is alink to what they look like
http://www.altex.com/product_info.php?cPath=344&products_id=6201
youll need thre of these of course when hooking it up dont pay attention to the color on these just the ones from the tv and surround sound and thats it your done it will all work if you want it to were you dont have to get up and push a button everytime most of them if you push all the buttons in at one time theyll stay like that