There should be a button on the top that opens the watch, under this is a dial, you lift the dial not the button, there should be a click and the watch will stop, then swivel the dial to set the time.
Now that is confusing!
There are a couple of answers depending on the type of watch you have. Is this a brand new battery type watch or a vintage windup type watch?
If it is a battery watch(quartz) you simply pull the crown out and you will be in the setting position. If it is an old windup watch it may also set that way. If a gentle pull on the crown doesn't put you in the setting position you may have a lever set watch.
This is a little more involved. You must remove the crystal. This will be screwed on and requires you turn it counter clockwise. It it is stubborn try putting the watch between your palms and twist. Once you have it off you will notice at about the 2 o'clock polition a small piece of metal sticking up. Hool this with your finger nail and it will slide out. With the lever out you should be able to set the watch. Push the lever in and now you are in the winding position. Enjoy your watch and write back if this doesn't make sense.
×
195 views
Usually answered in minutes!
×