Can't reset nikon D50 default settings

To reset the camera back to the default setting, remove the battery for 15 mins, replace the battery then open the camera's Menu and set the Date & Time.

Thats format, you need to reset your whit balance go to menu then white balance then set to white

Hi there,
There is no monochrome parameter in the D50 as oppose to the D200. You will have to convert using software.
Hope this helps.
Andrew

Remove your card and see if that clears the issue. If it does, then you card was probably not "seated" correctly and it needs to be reinserted. If that solves it, you're good to go. Another option is you try resetting your camera. This is a fairly easy procedure which involves either going into your setup menu and choosing "reset," or, removing the batteries for a few minutes. It may be that the firmware loading got corrupted and the camera just needs to be "rebooted," which is something that turning it on/off won't accomplish. But after which, you should have the camera reset to factory default settings.

Also, remove the lenses, clean the lens contacts with a pencil eraser, and reinstall. then power up.

Hi
I had the same problem and rectified it by going to Nikons website , follow this link for the answer:

http://nikoneurope-en.custhelp.com/app/answers/detail/a_id/10601/p/19%2C244/c/241/kw/Clock/r_id/127673

It sounds to me that their is a problem with the circuit board for the back of the camera. Please send it to a qualified repair centre.

that needs to be fixed by a technician , bring it to a repair shop where the sell nikon , or contact nikon at www.nikon.com for a repairshop or service point near you

sir, replace ur lens image reading sensor

Replace the button battery 1.5 voltsX2 your auto function will work properly.

There should be a "format card" option in the camera's system menu. do this and it may help the unfortunate equipment realize the situation:) (be sure there are no pics you want to keep as they will be permenantly removed)