Hoover Windtunnel repair manual

SOURCE: I have hoover WindTunnel Self Propelled Vacuum

Greetings from GoVacuum,

Here's a great video repair tutorial that we've put together to try and help you with the repair on your Hoover WindTunnel. I hope that this helps you with your repair. If you found this solution helpful, please rate this repair video by clicking on the 4 Thumbs Up Icons in the top right hand corner of my repair solution. Feel free to email me at [email protected] if you have any questions about the repair!

Video Repair of Hoover Windtunnel Belt Change


Thank you very much!

Chris Jones
GoVacuum.com

SOURCE: Hoover Bagless Windtunnel - Self Propel feature not working

I have the same problem with ours. If you lift the vacuum by the handle it breaks the lever on the transmission. You can find a replacement cable and lever on line for about $16.00 it is somewhat involved to repair but can be done by someone with mechanical ability. You can try and find a repair shop but be careful, they sometimes tell you the part is not available and try to sell you something else. I think they should be able to do the job for aprox. $80.00, but they may want more. I did it myself plus the height adj. knob for $24.00

SOURCE: Self-propelled Hoover windtunnel (with bags) will

this might help - go to following website and look for "troubleshooting"
http://www.fixya.com/support/p40544-hoover_ultra_u6430_900_windtunnel_bagged/manual-4481/page-13

SOURCE: Hoover Self-propelled WindTunnel U6436-900 cable

the belt could be broken. check the belt for the drive system.

SOURCE: hoover windtunnel self-propelled vacuum is not

have you cleaned the filters?