My Canon PowerShot A75, is not showing images on display screen, neither it is recording pictures. The pictures are Blank when shot and downloaded. However I can see stored images on my display screen. Normally when I switch the camera 'on', it shows the 'view' on display screen.Now if I switch it on nothing is visible on display screen. I tried the solution mentioned here ( pressing the switch on the top of the card slot). It is still not working.
From the Canon Website: Issue: The LCD/Electronic Viewfinder will not display an image. Solution: Special information regarding a blank or distorted screen on certain digital camera models Details: [ Hide ] Important Notice About Your Canon Product: It has recently come to our attention that the vendor-supplied CCD image sensors used in this Canon digital camera may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments. Effective immediately, and regardless of warranty status, Canon will repair, free of charge, products exhibiting the above-mentioned malfunction if the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair. U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to [email protected] This information is for residents of the United States of America and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region. We sincerely apologize for any inconvenience caused by this issue, and appreciate your understanding in this matter. Thank you for your support and patronage of Canon products.
I had already got the CCD changed for my camera free of cost. This was done 1 year back. The problem with LCD not able to display any image has popped up recently.
Also as the camera is able to take the picture rightly it is not the CCD problem but something else related to LCD display mechanism.
Not sure why it is not able display the images.
Anyways thanks for the above suggest solutions.
As mentioned Canon should fix this for you for free, including free shipping both ways. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110
Here's a revised link:
http://camerarepair.blogspot.com/2007/11...
×
Canon is aware of this issue and will repair free of charge (regardless of warranty status) this type of problem. Refer to Canon's website for more details.
2,054 views
Usually answered in minutes!
I have a similar problem on my Powershot A75 camera. I either have a black screen, or a lot of white lines shown ion the LCD. But, I can see icons on the screen.
no display on the LCD and not also showing the pictures clicked
I have Cannon diginat Camera, when switch on camera there some blinging image, image is not clear.
can you suggest me whats wron with my camera
I've had my A75 for 3 years and it just started doing the same.
LCD does not dispaly picture and no picture is getting recorded. only pink lines appears and recorded..
having a similar problem feels like the camera clicks a picture but lcd does not display anything, my camera is 3 yrs old
My camera, dont display any objects,, the screen is blurry. nothing but purple lines up and down, help get it to fix thanks
My camera has LCD monitor dosen't display image. Do I have to buy new one?
I also have a Canon Powersot A75 for three years now and have the same problem. The repair cost is nearlly the same as a new one.
I have the same problem. LCD shows stored images in playback mode, but in camera mode, LCD is black (but DOES show camera function icons) Pictures taken are black. Looks like CCD is shot. Any ideas?
I have the same problem. LCD screen is blank in "shooting mode," and any pics taken are also blank, though the LCD screen works okay in "playback" mode.
Same problem here. Camera is about three years old. Will try Canon to sort out.
Same problem.
Display works but there is no image on the screen nor any image taken in a "photo".
Worked one day and then not the next.
no lcd display
My Canon PowerShot A75, is not showing images on display screen,
neither it is recording pictures. The pictures are Blank when shot and
downloaded. However I can see stored images on my display screen.
Normally when I switch the camera 'on', it shows the 'view' on display
screen.Now if I switch it on nothing is visible on display screen.
I have read my owners manual cover to cover and can not find out what to do. The LCD monitor does not show any image when trying to tacke photos. It does play back images already stored.
Iam not sure if the camera is taking the pictures although orange an yellow lights appear when shotis taken.Icannot as well see any pictures on the screen.Batteries are O.K so is my CF card which I erased.I am not sure if I can chek the CF card by any means.Thanking You in advance
J.Ferney
i have no images on my camera and i did not erase them , i was reviewing the pictures, then it said no images, i have to get the pictures back
Samsung es 90 has frozen while recording video (at 15 fps) at 8 mins 13 secs .Still have picture (image on screen ) tried to switch off camera nothing happens Tried to restart recording nohing happens ?
×