* Just in case *
Also .. FREE download available here or here >
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_XL_5130_5232_5340_EN_208.PDF
Sewing Parts Online has the manual you are needing:
Brother Sewing Machine Instruction / Owners Manual
SOURCE: Brother XL-5340 sewing machine
Try a new needle, making sure it is put in properly. A bent needle can break thread. Make sure top tension is set properly.
SOURCE: machine not sewing
Have you checked that the tiny screw in the bobbin is not loose, sometimes this creates this problem for me or if the bobbin size is incorrect.
SOURCE: The needle on my brother
Hi. Check to make sure that the flat side of the needle shank is facing to the rear (away from you), that the needle isn't bent, and that it is inserted as far up as it will go.
Hope this helps,
Robbie
1,142 views
Usually answered in minutes!
I need a manual so I can at least sew a single stitch. I don't know any of the settings and I'm sure that it is as simple as setting dial to the appropriate#'s. I have tried everything, tension is too high and thread clogs @ bobbin. Thank you, Sandie.
How to make a button hole on xl 5340.
×