Caller picture and ring tone

Activating Personal Ring
You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you've assigned a personal ringer to that number, the phone uses it so you know who is calling. To turn the personal ringing on or off, follow these steps:

1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the PERSONAL RING submenu.
2. Move the cursor to select ON or OFF.
3. Press [Menu/Select]. You will hear a confirmation tone.

Selecting a Ring Tone (Handset only)
You may choose from four melodies or three tones for your phone's primary ring tone. Each handset can use a different ring tone or melody. The available ring tones are as listed:

1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the RINGER TONES submenu.
2. Move the cursor to select a ring tone. As each ring tone is highlighted, you will hear a sample.
3. When you hear the tone you want to use, press [Menu/Select]. You will hear a confirmation tone.

Adjusting the Speaker Volume
Handset Speakerphone: You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume while on a speakerphone call, press the UP Arrow button (to make it louder) or the Down Arrow button (to make it softer).
Base Speaker: You can choose from ten volume levels for the base speaker. To adjust the speaker volume while call screening or playing messages, press [volume +] (to make it louder) or [volume -] (to make it softer).

Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:

1. While on a call, press [Menu/Select].
2. Move the cursor to select AUDIO TONE, and then press [Menu/Select].
3. Move the cursor to select desired option (HIGH TONE, NATURAL TONE, or LOW TONE), and then press [Menu/Select]. Selected option appears in the display for two seconds, and then the display returns to normal.

Deleting Phonebook Entries
You can delete a single phonebook entry at a time or all phonebook entries at once:
To delete a single phonebook entry:

1. When the phone is in standby, press the phonebook key.
2. Find the entry that you want to delete and press [Menu/Select].
3. Select DELETE. DELETE ENTRY? appears in the display.
4. Move the cursor to select YES.
5. Press [Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.

Deleting Caller ID Numbers

1. To delete only one Caller ID number, press the Caller ID button when the phone is in standby, and then find the number you want to delete.
2. Press [Menu/Select] and select DELETE ENTRY.
3. When the phone asks you to confirm, select YES.

1. To delete all the Caller ID numbers, press the Caller ID button when the phone is in standby, and then press [Menu/Select].
2. When the phone asks you to confirm, select YES.

Note: When you delete a Caller ID number, you delete it permanently.

Deleting a Redial Record
If you want to delete a phone number from the handset's redial list, follow the steps below:

1. When the phone is in standby, press [Redial/Pause].
2. Use the UP Arrow button and the Down Arrow button to scroll through the redial list.
3. When you find the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY.
4. When the phone asks you to confirm, select YES. The redial number is deleted.

Resetting the Voice Message Waiting Indicator

1. When you receive a new voice mail message, the new message LED on the top of the handset flashes and VM appears in the handset display.
2. In the event your message alert tone gets out of sync with your phone company's voice messaging system, you can reset back to its original "no messages waiting" state.
3. To reset, press and hold [find hs] on the base for five seconds.
4. A beep sounds and the message alert tone is reset.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Which phone are you using ? Check your applications if your have installed any software like Voice/Talking Caller Id or something similar . This software will be the reason the Caller id is a voice and not a ring-tone. Even check the settings in ring-tone if you and option to switch off Voice Caller id. Either uninstall the software or disable the software from the options within.

I think that there have been some mistake.....Caller Tune means the ring-tone which is hearing by someone who is calling you.So you cannot set the caller tune yourself, it is provided by the Sim service provider.Here However, Ring-Tone means the tone which you are hearing when someone is calling you.We can easily set this tone by using....Menu......>Profile...........>Ringing tone setting....Set the tone what you wish............................

in the groups in the call settings or under the call settings it can be done

use caller group and change ur tune

if there is no dial tone that means that the connection is not being made when you pick up the phone hence you cannot answer nor can you get a dial tone
the fact that the phone rings indicates that the land line is good so the fault is in the phone itself

It was all a matter of pressing down the Digital TAD button down hard enough... o-:

not sure if this will work but go into downloaded ring tones pick one see the options and see if it says set as ringtone or message tone it should work also try going into profiles and perzonlize and go to ringing tone and pick downloaded tones hope that helps

it's in the profiler/contact of the caller

Do you have a dial tone? Do any other phones show caller id? do any other phones ring? Have you programmed the phones? Really need more information in order to help.