2007 Panasonic 50in Plasma shuts off after being on 30 min sleep timer off, is the problem the cooling fans out/ over heating

Enter its menu; set timer to 0:00. That is all.
http://electronicshelponline.blogspot.com/

seems problem in your plasma power section. get it repaired.

If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Hello
Check the cooling fans at the top working well or not. If found damaged, replace it. It is normal that a plasma TV will heat up to an extent. If it overheats, cooling fans should be suspected.

blinkin de red led tv panasonic plasma

Go in ur tv menu go to SETUP.Check for Sleep timer might be on.This timer have setting like 30 60 120 mins.Turn off the sleep timer tv well not auto shut off.Check ur remote control might have a button said sleep.

i have exactly the same problem but my t.v is 50 inch been advised it could be the fan or lamp.

all you have to do is just the size..Should be a rolvalution button on your remote.. 50 should be 19.9

sleep mode or timer? check settings

You should call for warranty service. If the set is very new try to get it exchanged.

There are some very heavy duty power supplies and many high power matrix drivers used in Plasma sets.

The description sounds like the noises are very loud. It is normal with any of these TV sets, if you put your ear right up to the back of the set at the vent holes you will hear some noises. These would be some acoustic harmonics from the power supplies and related circuits.

I am wondering if it is possible that there is something that is becoming less stable. If the set is working very well without any failure, so-far this is a very good sign. Before it gets to be a problem, I would have this checked.

On many models of these sets, they use fans for cooling specific areas. A bad fan can cause noise.


Jerry G.