2003 SUNQUEST PRO 24RS MANUAL TANNING BED

Question edited for clarity and spelling.

The all have model number, so generic help only.

Page 8, 22, for wiring what is where and page 24 for contact so you can ask them

https://www.manuals.ca/sunquest/pro-16se/manual?p=22

More here

https://www.google.com/search?sca_esv=5278b46dd4ebd301&rlz=1C1QJDB_enCA643CA644&sxsrf=ACQVn08YPezr_t_hMwPonp6a6Q_jK7w4og:1707790330399&q=sunquest+pro+tanning+bed+wiring+diagram&tbm=isch&source=lnms&sa=X&ved=2ahUKEwj13fnfnqeEAxUJEVkFHfedDnkQ0pQJegQIDRAB&biw=1920&bih=919&dpr=1

..

The humming noise and non-functioning fans in your Sunquest Pro 24RS tanning bed could be caused by several factors. Here are a few things you can check to diagnose the problem and potential solutions:

1. Check the power source: Make sure the tanning bed is properly plugged in and the outlet is providing sufficient power. Test the outlet with another device to confirm it is working properly.
2. Check the circuit breaker: Check the circuit breaker for the tanning bed to ensure it is not tripped or in the off position. If it is tripped, reset it and try turning the tanning bed on again.
3. Check the wiring: Check the wiring connections inside the tanning bed to ensure they are properly connected and not damaged.
4. Check the fans: The humming noise and non-functioning fans may be caused by a malfunction in the fan motor or the fan blades may be obstructed. Check the fans for any obstructions and test the fan motor with a multimeter to see if it is receiving power.
5. Call a professional: If you are unable to diagnose and repair the issue on your own, it is best to call a professional technician to service the tanning bed. They will have the necessary tools and expertise to identify and fix the issue.

In any case, it is important to exercise caution when attempting to diagnose and repair electrical equipment. Always unplug the tanning bed before attempting any repairs and do not attempt any repairs if you are unsure of what you are doing.

Question edited for clarity.
Question moved to a better one.

The manual is here

https://www.wolfftanningbed.com/tanning-bed-manuals.html

..

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CC4QFjAA&url=http%3A%2F%2Ftanning-bed-parts.com%2Fdocuments%2FETS%2520Tan%2520Documentation%2FManuals%2F25107-02a.pdf&ei=rgHMU_-wL4PgsATs1YDIDA&usg=AFQjCNGhkR620DLigHQH8efzhVobrcAL-w&sig2=i7Li-J05w3DeYJKZRCFtKg&bvm=bv.71198958,d.cWc&cad=rja

here ya go

I have 1987 SCA-24 series 1 wolffsystems tanning bed how do I change the bulbs or where can I get owners manuel?

I have a question for someone who knows about a Sunquest 24 r tanning bed? Involving bottom bulbs not lighting at all?

You are better off buying new hinges. Call manufacturer.

I do not have a diagram, but the contactors are really simple. You have 2 power switches on top of contactor and 2 wires going to the coil. There should be 4 larger wires on top, 2 in and 2 out.

If any of the crimp-on wire fasteners are blackened, then have a trained technician to replace the fastener. If bed comes on when pushing down on contactor with a plastic ink pen, then check the timer by turning on the timer and checking the voltage at the Main Relay Coil. If no voltage, then the timer is bad.

Have a trained technician to look at it. You probably have a loose wire nut in the wall box if it is hardwired or a loose connection on the wall receptical. The screws on the recepticals can come loose when pushing the receptical into the wall box. Most new construction uses plastic wall boxes so shorting out the receptical screws to the box should not be a problem. It is possible that the bare ground wire inside the box is hitting one of the receptical screws. If so, then push the bare wire away from the screws with an insulated screwdriver.

Ebay has several:http://compare.ebay.com/like/350311266168?_lwgsi=y&ltyp=AllFixedPriceItemTypes&var=sbar