It does everything else. When it comes to the spin cycle, it will turn slowly, but not at the speed that it is supposed to spin. Also there is more noise than I expected. The unit is only 13 month old. There is no error code at all.
Sounds like the impeller on the drain pump is blocked. Noise could be coins trapped in drum. Check filter thoroughly, if you cannot remove blockage you may have to remove tubes from pump to clear out any blockage.
Hello garrett_lind, I appreciate your inquiry!
From my understanding you are searching for the pressure calibration switch on your Frigidaire washer due to the fact that it is not spinning on the last cycle. Some possibilities as to why your appliance is not spinning could be your timer or drain pump. I could not locate steps to access the pressure switch but for electrical components I would recommend having a professional come out to properly diagnose and repair the appliance. -Matt
does not Pump or Spin then checkout this tip... not draining and or not spinning
To learn more about your washing machine, or to order parts, click here.665 views
Usually answered in minutes!
It fails to wring out some loads on wash settings. Appears to be related to "out of balance" condition because no single item will achieve full spin speed. Add a second similar item to the wash/spin and it will reach full spin speed. Some full loads will fail to reach high speed spin. Suspect an over-sensitive out-of -balance sensor.
Does anyone have a solution?
×