Sd/mmc Hi there i need some help im trying to get my sd/mmc card slot to work it has power to it but i cant access the sd card when i put it in the slot

There could be several reasons why you are unable to select the SD/MMC card for photos on your Philips photo frame. Here are a few possibilities:

1. Make sure that the card is properly inserted into the card slot.
2. Check the format of the SD/MMC card. The photo frame may only support certain types of card formats.
3. Make sure that the SD/MMC card is not full or damaged. If the card is full or damaged, it may not be recognized by the photo frame.
4. Try a different SD/MMC card to see if the issue is with the card itself or with the photo frame.
5. Reset the photo frame to its default settings and try again. To reset the photo frame, remove the card and unplug the power cord. Press and hold the "Reset" button (usually located on the back or bottom of the frame) for 10 seconds, then release it. Reconnect the power cord and insert the card.

If none of these steps resolve the issue, there may be a problem with the photo frame itself. In this case, you may need to contact Philips customer support for further assistance.

Try a different sd card,, chances are your card needs to be replaced.. yes they go bad, sometimes very quickly.

The DX7440 works with MMC and SD cards. Your 8GB card is actually an SDHC card. While it fits into the slot, it is electronically incompatible and will not work in the camera. You need to use MMC or SD cards, 2GB and smaller.

Use small utensils, such as tweezers, bits of wire or a paperclip. If nothing you try works, you can remove the bottom of the laptop to get access to the interior of the slot. Hopefully this won't invalidate your warranty, if you have one.
Good luck.

The Optio S4 works with MMC and SD cards. Your 4GB card is actually an SDHC card. While it fits into the slot, it is electronically incompatible. You need to go with cards 2GB and smaller.

hi
well sometimes it happens that laptops or desktops cant read a phone's micro sd card from usb cable so the easiest way is to download a software for your htc!this can be use to make the laptop recognised your phone or else just get a sd/mmc/rs-mmc usb card reader..just put your micro sd in the mmc card reader and plug it in your laptop as a usb pen dirve!!This method is simple, fast and easy..

Hi,
First of all we will have to check the slot size.If the slot is for mmc then you will have to use an adaptor.MMC slot is big in size and sd to MMC converters are available.
Don,t try to insert the card forcefully it may damage the reader's pins.

The SD/MMC memory slot is already configured to read standard and HDSD cards. Just remove the DELL blank from the slot by pushing it in until it clicks and release it. Then pull it out. Insert the SD/MMC card into the slot and push it in until it clicks. The DELL Blank is shorter than an actual SD/MMC card, so don't try to push the SD/MMC card any further than the 'click'. Remove by pushing in until it clicks, release, remove.

USB ports is not configured properly

I'm not sure that this will be a once a for all answer, but the link below says that any device with an sd slot can handle mmc but devices with slots designed exclusively for MMC cannot handle SD. Since the axim has an SD slot, I would say that it is compatible with MMC although I haven't tried an MMC card and the manual doesn't specific mention MMC memory.