Need to listen to office voicemail from home

To remove the voicemail indicator and stop the flashing light on your Panasonic home phone, you can try the following steps:
1. Access the voicemail system: Dial your home phone number from your Panasonic phone or another phone and let it ring until it goes to voicemail. Enter your voicemail password or follow the prompts to access your voicemail messages.
2. Listen to and delete all voicemail messages: Check your voicemail inbox for any new or saved messages. Listen to each message and follow the instructions to delete them. Ensure that your voicemail box is empty.
3. Exit the voicemail system: Once you have listened to and deleted all voicemail messages, exit the voicemail system by following the prompts or hanging up the call.
4. Reset the phone: Disconnect the power adapter from the back of your Panasonic phone base unit. Wait for about 30 seconds and then plug the power adapter back in. This will perform a reset on the phone and clear any residual indicators.
5. Check the voicemail indicator: After the phone has rebooted, check if the voicemail indicator is still active or if the light is still flashing. If the issue persists, proceed to the next step.
6. Disable visual voicemail feature (if applicable): Some Panasonic home phones offer a visual voicemail feature that may trigger the voicemail indicator and flashing light. To disable this feature, consult the user manual for your specific model and follow the instructions to turn off the visual voicemail function.
7. Contact Panasonic support: If you have followed the above steps and are still unable to remove the voicemail indicator or stop the flashing light, it's recommended to contact Panasonic customer support for further assistance. They can provide specific guidance based on your phone model and help troubleshoot the issue.
Remember to consult the user manual for your Panasonic home phone model as the steps and features may vary slightly.
this video might help

Standard Voicemail

• 1 Press the "Phone" button from the Home screen and then hold "1" on the keypad until the Galaxy S III dials voice mail.
  
• 2 Enter your wireless number -- without the area code -- to sign in to your mailbox for the first time.
  
• 3 Follow the voice tutorial to create a personalized password and greeting for your account.
  

Visual Voicemail

• 4 Touch "Apps" from the Home screen, and then scroll down to and select "Voicemail."
  
• 5 Select "Personalize Now" to connect to your mailbox. Follow the voice tutorial to configure your account.
  
• 6 Touch "End Call" to return to Visual Voicemail and view and listen to the messages in your inbox.
  

Sponsored Links

Read more : http://www.ehow.com/how_12306961_set-up-voice-mail-galaxy-iii.html

The voicemail is on the computer at your carrier's office, not on your phone. Call ATT or Verizon (or whoever your carrier is) and ask them to reset your password - then log in, listen to voicemails and change your message from there. If the phone is old and no longer connected to a carrier, the messages are lost unless your new phone uses the same carrier (you should be able to log in with your new phone and listen to old messages if you did not delete them yet - even if they came in when you owned this old phone.

You may be subscribed to a voicemail system provided by your telephone company. Please contact them for instructions on accessing their voicemail system.

just dial your voicemail box number to listen to voicemail messages left by callers..usually the #1 key is the voicemail dail key..press and hold the #1 key to have your phone dial the voicemail number..(if voicemail is activated and set up on your phone)

You can actually call your voice mail from a home phone and not use minutes. Any time you use your cell phone, whether someone calls you, or you call them, it counts as minutes to your plan. You should be able to see the actual voicemail number in your phone book, and be able to call it on a home phone and listen/delete them at your leisure that way. Your phone also rounds up on minutes. So if you talk to someone for 9 minutes and five seconds, it'll count as ten minutes to your plan.

SOME WORKAROUNDs - which MAY NOT WORK for everyone!


while ensuring that the TBB line is ON HOOK - NOT OFF HOOK:

1) LISTEN to your NEW VM through the Portal. If you listen through Email forwarding - this will NOT cancel the flashing VMWI.

2) Access your TBB VoiceMail from another phone (cell) or through RemotePhone. LISTEN to your NEW VM from there.

The flashing VMWI should be OFF and back to normal operation! You need to repeat the above steps for any NEW VM.

•You need to have at least one NEW VM that you have not listened to for the above to work. So if there are no NEW VM, phone your TBB line and create one. Then LISTEN to it from the Remote Phone/ cell phone, or delete it from the Portal, and the light should go off.

•Note that listening to or deleting OLD VM (whether in CURRENT or SAVED folders) will do nothing!

If your talking about listening to the individual mailbox greetings without calling into the system then you could use feature 980 (leave message)
enter in the mailbox number you want to check and press ok.

Hello Joel, I share your frustration. the only thing you can do is erase those old ones. that is what I do now and it works ok.

go in to your voicemail and in settings listen what options you have.Every operator has different services...