Sharp wont let me print 6 3/4 envelopes. how to do it?

SOURCE: Jobs going to Sharp MX-C311, but printer not

Worked with Sharp Support- client was using accounting and passcode was not set

SOURCE: Sharp MX 450 does not

take to service centre

SOURCE: How to setup SHARP MX

Buy a wireless print server. Which ever company you buy from will have a help line and guide you through set-up. They are priced $60 to $100

SOURCE: How do i print a big envelope in a Sharp MX 3501N

Select the heaviest paper setting available and only use the right-side manual feed tray.

SOURCE: what envelopes will work on

Most envelopes should work as long as you have:
1) fed them from the right side manual feed tray face down with the short side to the copier.
2) selected ENVELOPE as your paper type to run slower and lower your fuser heat.

The copier is designed for envelopes that have the flap down and the regular wettable adhesive. If you have gummed adhesive with a waxy peel strip that you remove before closing, the copier may not be designed to handle this. It may also help to put the front and rear pressure tabs on the fuser in the UP position.