My moter has gone can ifit a larger one

The resource center web site does not list machines of that vintage.
best bet is a motor rewind shop and shape larger brushes to fit.

If the belt wheel is pressed onto a spindle, you need a gear puller. Do you have any pictures of this? I am trying to visualize the problem.

Hi. I've checked the Kenwood Service website and from what it looks like, A720 mincer is only suitable for A701, A701A, A702, and for Major models A707, A707A, A717.

The mincer specified for the KM800 (from it's owners manual) is the
A950.

The model number doesn't really exist other than the fact that the stainless steel bowl is available for just about every Chef made. My own KM300 has a stainless steel bowl for example that came as standard - it however is the same bowl you can order from Kenwood or EBay under the A701/A901 model - all bowls from Kenwood can be fitted on the Chef model with the exception of the Major model which is a larger and taller machine.

I'm not 100% sure exactly what you're looking for but these folks have all sorts of parts lids/covers.

https://www.espares.co.uk/browse/at1096ma435/blenders---mixers---juicers/small-appliances/kenwood
hope this helps you.
Cheers

CAN REPAIR OR REPLACE MOTOR. IT NEEDS A CAPACITOR KIT FITTING OLD ONE WORN OUT.

£25 PART EXCHANGE PLUS POST. 07507400101

Hello. your Kenwood Major is A707 ?

the new attachment for front and high speed outlet, not fit in A701/707 ..

Please visit our web site Kenwood Chef Restore in download section. you can download the compatibility of attachments
Regards

Hello graham.
yes we can supply the armature to A701
or maybe the problem is another's .. is necessary check all machine first before change the armature.
Regards

Kenwood Chef Restore

Hello in ebay, you can get a gearbox for A701/A models ..

if you Kenwood is 1962 - 1975 is A701/A

looking the gearbox for this model. or in Billingtonelec.co.uk

Regards
Kenwood Chef Restore

Have recently inherited an old Kenwood Major A707A with same problem, contacted local electrical repair man, experienced with Kenwood mixers. He is fitting a new clutch, will cost about £30. I think its worth it. Anyone out there know where I can get Instruction Manual ?