Motokrzr k1m adding voice commands for voice dialing

Touchscreen phones simplify the wireless world, especially when combined with voice activation. Although making calls using voice commands was an option before touchscreens became available, the method used to set up this feature is different than it is for non-touchscreen units. It can take time to master the set of procedures that will get the feature working.
Step 1
Create a voice tag. Touch "Contacts" on the today screen. This opens the list of contacts on your phone. From here, do one of three things: you can hold your finger on the desired contact and then tap the "Add Voice Tag," you can select the desired contact, tap on "Menu" and then "Add Voice Tag," or you can tap the desired contact to open their personal screen and then hit "Menu" followed by "Add Voice Tag."
Step 2
Record the voice tag on your phone. Touch the phone number to which you wish to add a voice tag then touch the "Record" button. Record your voice tag for that contact. An icon will be displayed to the right of the number when the voice tag is complete. You can listen to your voice tag by touching the "Play" button on the screen or you can delete it to record a new one.
Step 3
Make a voice tag for a program. Tap the "Start" button on the phone. Go to "Settings" and then the "Personal" tab followed by "Voice Speed Dial." Choose the program for the voice tag and record the voice tag in the same manner as you did for the contact. To open the program with the voice tag, tap "Start," "Programs" and then "Voice Speed Dial."
Step 4
Launch a program or make a call. Make a call by tapping "Start" followed by "Programs" and then "Voice Speed Dial." You will hear a beep. Say the voice tag you recorded for the person you wish to call. You can open a program via the same procedure (by speaking the voice tag created for the program).
Step 5
Check the voice tags you created. Tap on "Start," "Settings," "Personal" tab and then "Voice Speed Dial." A voice tag tab appears and displays a list of your voice tags.

Press the Voice Command key, and when prompted, say turn prompts off. To turn Voice Command on, press the Voice Command key and say turn prompts on.
I hope that you have found this information useful, and if I can be of further assistance, please let me know. Thank you for using fixya!

Voice dialing with the Explorer 220:

With the headset on, press the call control (answer) button for around 2 seconds to activate the voice dialing. This should prompt your phone and you should typically hear "say a command", then you can say, for instance, "call home". It will then confirm the command by saying "did you say call home?" And when you answer "yes", it should start dialing.

However, just remember that to use voice-activated dialing, your phone and cellular service must be capable of voice-dialing and this feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Also, here is a link below for the Explorer 200 series user guide.

http://www.headsetsdirect.com/pdf/explorer230_ug_en.pdf

Try going to Menu > Contacts > Voice Command

You need to Add Voice to Contact first

for that find out the key which is works for Voice Commands.

By default if you hold Volume Up key or 1 or * keys any of these keys may work for Voice Commands.

Sort out then you will get an option enter voice command ..

let me know the result..

Regards,
Suraj.

select your memory card to find the songs if you can not then reformat the card then try adding the songs again.

Voice Command


To activate voice commands:
1. In your menu, go to MY STUFF MENU
2. select TOOLS
3. select Voice Command
4. Enable the on/off option



How to use it:

Call <Name or Number>: This function is activated only when if user says command “Call” and name stored in address book or specified phone number. Handset, voice engine inside recognize users utterance handset, displays name lists from your phone’s address book or phone number, however noise might caused to display candidates. Additionally user can superimpose number type at the end optionally, such as “mobile”, “home” or “office”.


Hope this helps & happy holidays!
-TJ

you must copy a phone number to the phone from the sim card once you have a number stored in the phone memory select your phone book scroll to the number select options scroll down to add to voice dial select it you should get a screen that says say a name when your done just select save

that is why the phone comes with a manual pls read it

I had a problem getting the voice dial to work on my K1 phone. The voice dial would not work if the contacts are stored on the sim, once they are copied to the phone memory all wored fine.