Cannot sign on after installing the Netgear WG311

This model doesen't have Windows 7 support yet. Try with this driver version http://kb.netgear.com/app/products/model/a_id/2566, it might work with Windows 7 as well. Otherwise you'll have to wait or change the operating system.

Try uninstalling and reinstalling the device drivers for your WLAN adapter and then try connecting.

Hi,

Install the adapter using the drivers which you can download from the below link:

http://kb.netgear.com/app/answers/detail/a_id/747

Hope this helps

to configure the WG311 on the computer, first instll the adapter using the driver CD. follow the step below to configure wireless connection:

1. Double click on WG311 icon from the right hand extreme bottom corner of the screen, near the system clock, in the system tray.
2. Click on networks tab.
3. Click on the SCAN button - This will show a listing of all available networks.
4. Select the network you wish to connect to and click on the "CONNECT" button.
5. This will automatically take you back to the settings tab.
6. If you are using WEP security then Enter the WEP KEY under the option 'Enter Key manually' under the settings Tab.
7. Apply Settings .
8. This should get you connected to your selected network.
9. Click on the 'About' tab and check the IP address.
10. If you are getting an IP address in the format of 192.168.1.x, try to go online.
11. If you are not getting an IP or the IP is in the format of 169.254.x.x, restart the computer and then try to go online.
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

I think FixYa has a whole recommendation site for this (check out the recommendation link at the top of this page), they might get you price for it somewhere

I M NOT INSTALLED THE DRIVER OF NETGEAR WIRELESS WG311 ADAPTER FOR WINDOWS 2003 SERVER. PLZ. GIVE ME A DRIVER FOR WINDOWS 2003 SERVER

Hi!

I'm sorry to tell you, but Netgear does not have a Macintosh driver for WG11 adapter. It can only work with Windows OS.

Have a nice day!

I do it for a living. In my experience with routers in general, they have a tendency to reset themselves with general poweroutages and power surges. I would suggest hard wiring to the router and going into the settings. It might surprise you to find the wep key changed itself during the week. Hope this helps.

Hi,

You can download the driver from here..

Goodluck,
Dont forget to rate me as Fixya..

you cannot send anything wireless to bluetooth they work on different megahertz, on bluetooth enabled devices can use file transfer