Brand new Maytag Ensignia. I washed for the first time and thought the clothes were wetter than normal. Continued to do the laundry and then realized for sure that after the spin cycle the clothes were filled with water and soap residue. I put on the additional spin cycle and it did no better. They were still just as wet. Tried to find another washer but they didn't have one and repair man can't come for a wk. Very upset.
45 percent...wait for the next service bulletin...55 percent installation...or both ....100%...that's the formula and also forget to read the use and care...trifecta of **** thats the ("FixYa!")
Possibly not a machine fault. if drain is connected to sink plumbing, remove the drain hose and see if it pumps out into a bucket.
575 views
Usually answered in minutes!
Same problem, however, have checked drain & this is clear.
All water is out of tub after spin cycle stops, but water starts dripping into the tub from the supply valve at the top so that clothes are wet if they sit after spinning. Solution is to put back into spin mode, after clothes start spiinning, interrupt the spin mode and quickly remove them before more water can run in.
After cycle is complete, water drips from above and will fill the tub back up. Just started happening last week. GOtta get those clothes out fast. Whats the part that needs to be fixed? Maytag Ensignia.
Yep...mine too is full of water after the spin cycle...obvious design flaw....tried the double spin and all....any others want to take a shot at this?|
does not dry on spin cycle
the washing mahine spins and water drains out but the cloths are still very wet even after spinning them again the residual water seems to stay
×