Question about Kitchen Ranges

1 Answer

Frigidaire gas range model ES330 error code SAb

Error cose SAb

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 4,342 Answers

This is SB mode, show room mode. To deactivate showroom mode, remove power and reapply. Press Cancel to bypass programming clock. Within 60 seconds of reapplying power, press Oven Light key and top oven Timer key simultaneously.

Posted on Aug 07, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 116 Answers

SOURCE: Frigidaire Electric Range error code

Hi jacksmdmat,
Your f30 problem may be a bad sensor circuit. It may have an open connection or just plain defective sensor. Check the connection between the clock and the sensor as well as disconnect and measure the resistance of the sensor - should be about 1090ohms at room temp (75F)

Posted on Sep 04, 2008

  • 1 Answer

SOURCE: bybass auto shutoff (frigidaire gas range ES340)

Look on page 10 of the use and care manual under "To Set Control for Continuous Bake or 12 Hour Energy Saving" Page 10 in my manual.

Posted on Sep 09, 2008

  • 9 Answers

SOURCE: Frigidaire Gas Range Oven not getting hot - FGF376CEFP

DEAR CORDLESS TRY CHANGEING THE GLOW IGNITER THE GLOW IGNITER GOES BAD AFTER A FEW YEARS AND YOU HAVE TO CHANGE THEM YOUR BURNER SHOULD LIGHT IN 30 TO 60 SECONDS IF YOUR GLOW IGNITER IS NOT DRAWING ENOUGH AMPS YOU WILL SMELL GAS BUT NOT IGNIGHT THANKS GEORGE

Posted on Apr 11, 2009

garing
  • 998 Answers

SOURCE: Frigidaire gas range broiler element does not light.

glow plug needs to draw 4 amps to open gas valve even if it red hot ...not drawing 4 amps replace glow plug

Posted on Aug 22, 2009

localwonder
  • 6784 Answers

SOURCE: whirlpool gas range m#SF114pxsq1 diplays an F1 error code

HI. This is a basic Electronic Range Control Board failure code. I would advise to try a hard reset. This may correct the fault, if the damage is not severe. Simply unplug, or shutdown the appropriate circuit breaker for five minutes. After the five minutes have passed, kindly re-introduce power to the unit once more. Try to preform a baking cycle. if the code continues to illuminate during the attempt to operate the range, simply replace the main electronic control board(ERC or Clock).

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We had some sort of electric power failure last night lasting only a few seconds, but now none of the control buttons on the gas range function. In the time window 5a6 shows. No way to use the oven.


You are in Jewish Sabbath Mode, it is 'Sab'

Search Results Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab". To disable the Sabbath mode push and hold the Clock pad for 3 seconds.Nov 10, 2007

Maytag Oven WEIRD Error Code 5ab - Appliance Repair Forum

forum.appliancepartspros.com/oven.../2348-maytag-oven-weird-error-code-5ab.html Feedback
About this result

Will you tell me what error code 5A6 means on Maytag MGR6875ADQ ...

https://www.shopyourway.com/questions/1098960 Nov 24, 2010 - As indicated in the previous response, the 5A6 indicates that the range is in the Sabbath mode (SAb). The image below shows the information on this mode for your range. Press the CLOCK button and hold it for 3 deliberate seconds to cancel this Sabbath mode. The control should then work normally. what does the f-2 error code on my maytag oven mean?
2 answers
26 Jun 2010
What does the SAB error code mean on my Maytag ...
1 answer
1 Jan 2010
How do I cancel the Sabbath mode on my Maytag range?
4 answers
30 Dec 2008
What does an SA6 (or 5A6) error code mean on my ...
1 answer
13 Nov 2008
More results from www.shopyourway.com

Maytag Oven SAb error code - YouTube

? 0:54
https://www.youtube.com/watch?v=XUP1BOzqPUo Jan 1, 2014 - Uploaded by Life With Christ
The SAb error code will freeze your oven functionality and you will not be able to cook or program the oven ... Oven Repair including Ranges and Cooktops

Mar 12, 2018 | Kitchen Ranges

1 Answer

What dose SA6 or SAb stand for?


Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds.

Jun 24, 2015 | Kitchen Ranges

1 Answer

The digital display for a Magic Chef gas oven reads "5 A6", what does that mean?


Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds.

Mar 21, 2013 | Kitchen Ranges

1 Answer

I HAVE A MODEL MGR57650D0 AND I CANT CHANGE THE TIME IT ONLY DISPLAYS "5A6" WHAT CAN I DO


That error could actually read SAB, but no worries. Hold down the clock key for about three seconds and that should clear the problem.

Mar 13, 2011 | Maytag MGR5765QDQ CleanDesign Gas Kitchen...

1 Answer

Screen reads sab & none of the functions work


Hello & Welcome to FixYa

SAB is not a error code and is displayed when the unit is set up to Sabbath mode. To reset this error code you can press and hould the CLOCK pad which is located below the display for around 15 seconds. If the problem returns then it is recommended to leave the unit unplugged for 72 hrs so that the problem is solved. Please get back to me if you have any other questions.


Kevin

Mar 12, 2011 | Kenmore 47153 Stainless Steel Dual Fuel...

1 Answer

I have a code 5ab on the panel my model nuber is MGR5775QDS its a 30 inch free standing gas stove.


Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds

Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/2348-maytag-oven-weird-error-code-5ab.html#ixzz1GLM0d1gp
http://forum.appliancepartspros.com

Mar 12, 2011 | Maytag MGR5775QDS Dual Fuel (Electric and...

1 Answer

Frigidaire FEB30T5DSD


not actually an error. i think holding cancel + cook/hold should undo that

Sep 01, 2008 | Frigidaire FEF336BC Electric Kitchen Range

2 Answers

Range does not work-message on stovetop reads 5Ab


same exact thing happened to me! Its not reading *5Ab* it's reading "Sab" as in Sab MODE...PRESS AND HOLD THE CLOCK BUTTON FOR A TOTAL OF 4 LONG SECONDS!! AND WAAAM!! Your stove is fixed and back to normal..with the Time! lol

Oct 10, 2007 | Maytag MGR5751AD Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Paul Carew

Level 3 Expert

3428 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...