Office Equipment & Supplies Logo
Anonymous Posted on Aug 04, 2012

Lanier LP235c display says Add Yellow toner

The printer display has a red light on with the message "Add Yellow Toner" it is a brand new cartridge. Any ideas? Regards David Gollings

  • Anonymous Aug 06, 2012

    Have tried it a number of occasions

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Aug 04, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 03, 2012
Answers
2
Questions
1
Helped
924
Points
6

Try removing the toner cartridge and gently cleaning the electrical contacts for the sensor. Sometimes they get toner residue on them and give false readings.

  • Anonymous Aug 04, 2012

    Tried that thanks - no joy :-(

×

3 Related Answers

Anonymous

  • 1 Answer
  • Posted on Apr 01, 2008

SOURCE: Lanier LP235c Ink Marks on prints problem

I discovered the magenta pcu roller which I had replaced was damaged. Thanks for your help.

Ad
Joed911

JDTec

  • 4338 Answers
  • Posted on Nov 30, 2010

SOURCE: Where is the toner waste

The only reference to "waste" is the punch waste. I could not find the "Toner waste" in the manual:

Open the Finisher front cover.
Pull out the Punch waste box carefully.

http://www.lanier.com/downloads/manualFrame.aspx?path=http://support.ricoh.com/bb_v1oi/html/oi/lan_u/model/mp35/mp35en.htm

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Anonymous

  • 73 Answers
  • Posted on May 12, 2011

SOURCE: In Lanier GX3000 I would

The printer requires that all of its ink cartridges have ink before printing, the color ink cartridges will have to be replaced.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I had a jam, upon clearing the jam, the printer will hang with the motor turning, and the display saing 'adding toner'. I changed the (new) toner, for a brand new one. Still message will not go away.

Leave the machine working to see the next message of Adding Toner. Usually the next message of "Adding Toner" is "Ready to Copy".
If the next message is "Add Toner", i suggest you to pull the new toner kit out and push it a little bit harder and check again.
If you power the machine off and on again, can you see what the message about toner is, Original or Unknown Toner is installed?
0helpful
1answer

Incorrect toner

defective toner... take it back to your vendor
0helpful
1answer

Lanier 5227 add toner message

I take it you have installed a new toner???? Do oyu know the last time the drum & developer unit was replaced?? It is sold as a unit with the developer in the unit. It is a customer part to replace. If these parts were replaced resently, the problem could be in the toner holding unit that you put the toner bottle into... There has been some up dates to that unit > they improved the fin's that moves the toner into the developer unit... Good Luck
1helpful
1answer

On my Dell 3110cn printer, I keep getting the following error message: "Error C Cart 093-919" I bought this refurbished yellow toner cartridge from a reputable dealer on EBAY and it is basicaly...

remanufactured toners, or off brand toners are sometimes not compatible. I would contact the dealer you bought the toner from and tell them the cartridge is defective and demand an exchange or refund.
0helpful
3answers

ML-2510 Laser Printer : persistent blinking red light

Dear

This problem you will be noticed when toner is 90% empty.
Does the printer is functioning or No. If yes the problem is 90% toner is finished.[10% toner remaining alert]
If printer is not functioning Please change the toner from Genuine dealer. Else your printer fails due to non genuine and refilled toner.
0helpful
1answer

After removing toner cartridges error display said replace various colour toners.

it is not according to your printer or your head of cartige is not clean or damage. try replace new one
1helpful
1answer

I have a lanier lp-138c that is giving me a black toner low message on brand new cartridges... Tried 3 different cartridges and at first they register and then to the toner low...

It could be that the black developer unit is clogged. The toner low sensor is located in the black developer unit. A trained copier tech may be needed to troubleshoot this.
Not finding what you are looking for?

103 views

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66947 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...